Search results

I had a similar problem with the tail lights not turning on when the pedal is pressed, I usually had to kick the harness around to signal my intention to stop. I went to the junkyard on sunday and found the switch and the harness from a 95 Explorer. I unplugged the harness today and found the...

Do you plan on tinting the front window?

I havent taken the truck offroad but I did go to a parking lot with some ledges on the way home from work. I have a video Ill upload to youtube when I have time. I also have a few dark pictures my brother took. The tires worked good but running them on the street, I think they are loud and if...

I just took some pics of my Bronco with its suspension work. I am running 35x1250x15. The bumper had to be trimmed a bit.

When I first got this bronco I had the same problem but with me it was the opposite, I could not lower the window, after lowering the window with a battery straight to the motor, this allowed me to open the gate and slam it shut.

So what you are saying is that the problem might just be one faulty switch and replacing one, if that does not work the second one might be the one not functioning. So if that is the case I can use the one I took off first which should be a working switch and replace the second one with it. Am...

So what you are saying is that the problem might just be one faulty switch and replacing one, if that does not work the second one might be the one not functioning. So if that is the case I can use the one I took off first which should be a working switch and replace the second one with it. Am...

Thats funny because when I was building it my friend named my system the fluxcapacitor

When I made the system but before installing it in the truck I ran one bottle and did test it with a flame. Everything was good but very faint, after messing with it a little more I got a larger flame to stay lite. I then created a second bottle and installed it on the truck. Now I am a fan of...

I will try switching from the drivers to passenger as soon as get my truck back from the shop.

Has anyone had the problem of not being able to lock or unlock the door locks from the drivers side and only being able to lock from the passenger side. I have checked the fuses and they are all good, I have unplugged and replugged the switches and still the problem remains.

Hello everyone, it has been a while since I have been online. Right now I am working on getting my truck lifted and ready to run on some desert trails. Attached are some pictures of the work so far. The first few are of breaking down the front end and then you can see the beams all sand...

I was running 31 10.50 15 with a 5.8 and a stock 8.8 rear end. On a good tank I will do 9-10MPG and on the worst tank, if I have my Hydrogen pump off I will get about 7-8MPG I have my truck at the shop getting suspension upgraded, I will have about 5 to 6 inches of lift up front and deaver...

Just today, my friend is telling me the car is loosing power when normal driving. I have to check out that fuel pump resistor cable now. I was hoping the problems would be over.

Yeah, but good thing its the minor problems that are easier to get fixed on a short notice, at least when you can tell what the minor problem is.

Actually no, we have the car running but the security light flashes here and there. She has not had a problem ever since I replaced the relay. I did however screw up by leaving the water hose from the resevoir a little to loose, yesterday it was leaking and when I looked under the hood I...

Be careful with the light switch though. I had a hard time removing it, I was able to get to the rear release button for the knob, but now my dash panel lights do not turn on.

Love that nova ohh and theres a stang in there too.

What is a carrier?

Yeah, its kinda hard not notice it when I have the exact one execpt for the extended magazine part. Mine has the a4 collapsible stock like yours and the full electronic trigger. I usually used mine at jungle island in Corona. After I hurt my back I have not been back.