mullet_mania
New member
- Joined
- Jun 17, 2006
- Messages
- 1
- Reaction score
- 0
Does anybody know of a back wall that you can buy when you chop the back of a bronco and convert it into a pickup?
Bronco Truck Conversion
- Thread starter mullet_mania
- Start date
Disclaimer: Links on this page pointing to Amazon, eBay and other sites may include affiliate code. If you click them and make a purchase, we may earn a small commission.
bluesman17
Spam Terminator
Isnt that an F150?
Seabronc
New member
/emoticons/[email protected] 2x" width="20" height="20" /> /emoticons/[email protected] 2x" width="20" height="20" /> ) ) ) Yah, a short one ) ) ) Why not just buy a F150?You guys!!! )
There was a company that made a hardtop bed cover along with the inner wall to get a "pick-up" or "fastback" look. The cost was about $1100, and they are no longer in business. ( No wonder!!! ). It would take alot of work, but you could cut the back of the cab from an F-150 and mold into the Bronco cab. With careful measuring and fitting skills, and $$$. A cooler mod would be like the GM Avalanche, with a window and fold-down wall. Good luck!!! JSM84
)There was a company that made a hardtop bed cover along with the inner wall to get a "pick-up" or "fastback" look. The cost was about $1100, and they are no longer in business. ( No wonder!!! ). It would take alot of work, but you could cut the back of the cab from an F-150 and mold into the Bronco cab. With careful measuring and fitting skills, and $$$. A cooler mod would be like the GM Avalanche, with a window and fold-down wall. Good luck!!! JSM84
The Bronco fiberglass half-cab conversion with glass slider for 78-96 was formerly made by Creative Products; company rep said they sold the mold to Bronco Graveyard in an e mail.
Mark @ Jeff's Bronco Graveyard replied in an e mail to me that "did buy their molds, but they are so bad, we have to restore all of
them before we can start making product. Should be available this summer"
Mark @ Jeff's Bronco Graveyard replied in an e mail to me that "did buy their molds, but they are so bad, we have to restore all of
them before we can start making product. Should be available this summer"
