broncorama89
New member
my neighbors oil pans got arust hole. he knows its expensive, but how much is an estimated cost?
oil pan swap
- Thread starter broncorama89
- Start date
Disclaimer: Links on this page pointing to Amazon, eBay and other sites may include affiliate code. If you click them and make a purchase, we may earn a small commission.
mbtech2003
New member
i bought one from a ford dealer a couple of weeks ago for bout $140+ gaskets i had my engine out already so it was easier to change.... not sure on the labor cost but a 3-4 hours i think would be a good time. all depends on your local shop. i'm guessing bout 3-400 bucks should be about right. plus the cost of an oil change duh lol :-B
goodluck
>-
goodluck
>-
mbtech2003
New member
u could go to the bone yard but then u have to clean it and paint it and so on. i bought new so their was no question on it's condition. and think about it if the orignal one rusted out what do u think a used one is gonna do :blink: plus it will have dents in it because they allways have the engine on stand :^o in the junk yard lol.
do what ever you want but new is better. might be more but u wont be replacing as soon again /emoticons/[email protected] 2x" width="20" height="20" />
do what ever you want but new is better. might be more but u wont be replacing as soon again
/emoticons/[email protected] 2x" width="20" height="20" />BLADE262US
Active member
Theres always this option . I got one from them and you will not beat the price anywhere and it was good quality too /emoticons/[email protected] 2x" width="20" height="20" />
http://cgi.ebay.com/ebaymotors/FORD-SMALL-...1QQcmdZViewItem
Here if you dont want chrome /emoticons/[email protected] 2x" width="20" height="20" />
http://cgi.ebay.com/ebaymotors/FORD-SMALL-...1QQcmdZViewItem
EBAY IS YOUR FRIEND /emoticons/[email protected] 2x" width="20" height="20" />
/emoticons/[email protected] 2x" width="20" height="20" />http://cgi.ebay.com/ebaymotors/FORD-SMALL-...1QQcmdZViewItem
Here if you dont want chrome
/emoticons/[email protected] 2x" width="20" height="20" />http://cgi.ebay.com/ebaymotors/FORD-SMALL-...1QQcmdZViewItem
EBAY IS YOUR FRIEND
/emoticons/[email protected] 2x" width="20" height="20" />
Last edited by a moderator:
BLADE262US
Active member
Heres the ultimate reusable gasket that really doesnt ever leak its all I have ever used since I found them . /emoticons/[email protected] 2x" width="20" height="20" />
http://store.summitracing.com/default.asp?...t=egnsearch.asp
So now you have roughly $60 into parts now do you have the tools to do the job ? Whats your ambition level ? How much do you get paid an hour ? I make $25 an hour so even if I bought the parts and worked on it for 4 hrs I would still have less into it than taking it in so fix it yourself thats what I would do . /emoticons/[email protected] 2x" width="20" height="20" />
/emoticons/[email protected] 2x" width="20" height="20" />http://store.summitracing.com/default.asp?...t=egnsearch.asp
So now you have roughly $60 into parts now do you have the tools to do the job ? Whats your ambition level ? How much do you get paid an hour ? I make $25 an hour so even if I bought the parts and worked on it for 4 hrs I would still have less into it than taking it in so fix it yourself thats what I would do .
/emoticons/[email protected] 2x" width="20" height="20" />Minnesotabronco96
New member
at least your truck doesnt look like this!
id say go with a new one.
id say go with a new one.
