Need heat shroud part number for 1984 351W 4V

Joined
Sep 19, 2016
Messages
50
Reaction score
17
I'm looking for the exact part number or picture of exact exhaust heat shroud for 1984 Bronco XLT 351W 4V 5.8L engine. This provides hot air through a 2" tube to the air intake snorkel.

I think it is EOSZ-9A603-A but not sure. I've made one out of 1/16" aluminum 14" long by 3.25" and a 2" aluminum elbow. Essentially 2 long sides folded up and 1 end folded up with a 2" hole cut for the elbow. Other end and top are open. It slides underneath the exhaust manifold and I used SS hose clamps around it to secure in place. There are 2 small bolt holes on underside of exhaust manifold to secure it but not very accessible.

Even though I have made something I would like to know the correct part number.

Thank you!
 

johnnyreb

Well-known member
Joined
Feb 23, 2021
Messages
1,055
Reaction score
420
Location
West Virginia
I'm looking for the exact part number or picture of exact exhaust heat shroud for 1984 Bronco XLT 351W 4V 5.8L engine. This provides hot air through a 2" tube to the air intake snorkel.

I think it is EOSZ-9A603-A but not sure. I've made one out of 1/16" aluminum 14" long by 3.25" and a 2" aluminum elbow. Essentially 2 long sides folded up and 1 end folded up with a 2" hole cut for the elbow. Other end and top are open. It slides underneath the exhaust manifold and I used SS hose clamps around it to secure in place. There are 2 small bolt holes on underside of exhaust manifold to secure it but not very accessible.

Even though I have made something I would like to know the correct part number.

Thank you!
Theirs a memeber on hear. Who has videos and dismantels all years of broncos. I can,nt think of his name and he also sales parts. I,m sure he would take a picture and give you the part number. I,ll try and find him and let you know.
 

johnnyreb

Well-known member
Joined
Feb 23, 2021
Messages
1,055
Reaction score
420
Location
West Virginia
Theirs a memeber on hear. Who has videos and dismantels all years of broncos. I can,nt think of his name and he also sales parts. I,m sure he would take a picture and give you the part number. I,ll try and find him and let you know.
(Broncoand partsgarge}Look for him in membership or YOUTUBE. He has videos their.Good luck
 

Members online

No members online now.

Forum statistics

Threads
21,806
Messages
128,649
Members
24,014
Latest member
Drz196800
Top