leveled bronco

[bill.lane]

i installed a set of 1986 f-150 springs on the front of my 95 bronco and 1.5-2 inch rear helpers and i'm wanting to fix my camber/caster now any suggestions? f-150 springs amounted to 2 inches of lift for the front end. now front tires are riding on the outside edges and i just installed new tires and cant drive my bronco

 

[wileec]

You will need a different/new/better camber bushing with more flexibility. You should be able to get it to an alignment shop 20 or so miles will not hurt

 

[Seabronc]

You need these http://broncograveyard.com/bronco?search=camber+bushings

Good luck,

>-

 

[bill.lane]

thanks just ordered new adjustable bushings

 

[miesk5]

yo Bill,

This is for 96, but same;

can use info to ensure shop does work according to Fords specs;

Wheel Alignment, Front
Caster and Camber, Bronco and F-150, F-250 4x4 Vehicles

Optimum Caster, Camber, And Total Toe Settings  verify Camber & Cater Split Optimum Ranges;

94 Bronco has slightly different ranges forl

Camber split is .0+/-.5

Caster Split is -.5+/-.5

96 Bronco

Camber split is 0° ± .4°

Caster Split is -.5° ± .4°

all others are same for 94 & 96

Alignment Settings TSB 93-23-24 for 94 Bronco, F Series, Aerostar, Explorer & Ranger
Source: by Ford via Chilton http://content.chiltonsonline.com/TSB/displayTSBHandler.ashx?assetID=36533&key=6kAUBD5BruOJf%2f3tgozUqjXM3RdbjcQqW4sVWiE%2fp2IojfpfKqM07dr61%2bQAWHtTZr4ceHaQGlj8NylACcNZ4qedMqy4JdYyAXN5akgfkpHUz4aCpJyaaA%3d%3d

Partial 1996 Bronco/F-SeriesWorkshop Manual

 

[bill.lane]

thanks i appreciate the help