Disclaimer: Links on this page pointing
to Amazon, eBay and other sites may include affiliate code. If you click them and
make a purchase, we may earn a small commission.
Need to find out if they were for a 302 or a 351 if you have the same motor no problem but if there for a 302 and you try putting them on a 351 you will have clearance problems . I know headman , blackjack , and the set of hookers i have are bent a bit different for the 351 than a 302 due to the 351 being a bit wider youll run into things liek it not clearing the frame rail or it will rub on the front driveshaft . I have yet to find a set of headers that i didnt have to grind away a little bit of the frame on the passenger side to give them enough clearance . But if you can get them cheap and have torches anything is possible. /emoticons/[email protected] 2x" width="20" height="20" />
This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
By continuing to use this site, you are consenting to our use of cookies.