jasindude1
New member
- Joined
- Feb 18, 2017
- Messages
- 22
- Reaction score
- 0
So I picked up a Bronco from a work friend. It needed some fine tuning, I took it to firestone to get an alignment bc the steering wheel was off and they said they were able to adjust only the toe but the caster camber was "maxed out" I bought the caster camber bushing but they look the exact same as what I have on my truck now, how do I kno if they will get me within spec range? The truck runs and drives good and straight now but u can notice the front tires tilt inward a bit. I also have a 3" lift and 33's on it.