Transfer case Fluid

Disclaimer: Links on this page pointing to Amazon, eBay and other sites may include affiliate code. If you click them and make a purchase, we may earn a small commission.

crigby

New member
Joined
Jun 21, 2007
Messages
9
Reaction score
0
I have an 84 with a straight 6 and the 4 speed manual transmission with the grany gear, I am going to be towing a boat this summer and figure it is time for a flush of the t case, does anyone know what is some good fluid to use?

 

BLADE262US

Active member
Joined
Feb 21, 2004
Messages
1,713
Reaction score
5
Location
Michigan
An 84 should have a borg warner 1354 or a new process 203 aluminum ( dont quote me on the NP case they used one but not sure on the 203 ) You just use dextron 3 mercon tranny fluid in them . I dont know if Id use any synthetic in it :D /emoticons/[email protected] 2x" width="20" height="20" />

 

BB33's

New member
Joined
Feb 22, 2007
Messages
311
Reaction score
0
Location
Rancho Cucamonga CA
I did the same on mine and used ATF+IV (ten bucks a quart!) but mercon works. While your under there its a good idea to check the speed sensors o-ring thats on the top of the case (if you have the Borgwarner) they like to go bad and shoot out fluid

 

Members online

No members online now.

Latest posts

Forum statistics

Threads
22,709
Messages
137,175
Members
25,450
Latest member
Coastersfwb
Top