tonneau?
- Thread starter pukfit64
- Start date
Disclaimer: Links on this page pointing to Amazon, eBay and other sites may include affiliate code. If you click them and make a purchase, we may earn a small commission.
do you have the URL for it?..I looked there but did not see it.
creproonline.com Creative Products did make a fg 1/2 cab conversion for the Bronco but went out of business; sold molds,etc. to JBG.
Mark of JBG e mailed me back in JAN and wrote; "...We did buy their molds, but they are so bad, we have to restore all of
them before we can start making product. Should be available this summer.
Thanks, Mark."
do have some pics tho of this fg conversion from CP; http://web.archive.org/web/20021017172047/....com/bronco.jpg
http://web.archive.org/web/20021017171157/...om/bronc2in.jpg
parts depiction by Creative Products - http://web.archive.org/web/20021017172833/...ges/hckitin.jpg
original description without pics - http://web.archive.org/web/20011020014444/..._conversion.htm
We did buy their molds, but they are so bad, we have to restore all of
them before we can start making product. Should be available this summer.
Thanks, Mark."
btw, Classic Roadsters II, Centre, MN is making a tonneau style and possibly a full size soft top for the Bronco. They have their own upholstery shop that has been in the custom/kit business for about 28 years and have produced soft tops for cars as well as full interiors, so experience is top of the line.
They will be made of Haartz nylon material, a material used by some major auto & boat manufacturers, and it would come with either a clear or tinted window.
The top will mount using the existing hard top holes, so you will not have to drill any holes; the tailgate section will be secured with an industrial strength velcro, so no drilling will be necessary there either. The tonneau style top will cost $375.00, and the full soft top will be $500.00
http://www.classicroadsters.com/
At present, there is currently no info on the Broncos there yet, but you can still take a look and see the work they have accomplished.
Bill Scott wrote to me in late OCT - "We have one of the tonneaus done and here, I have fitted it on my Bronco and found that we needed a few adjustments...opening a new store in town and have been really busy with that, so hopefully once that is up and running we can focus on the tops again..."
creproonline.com Creative Products did make a fg 1/2 cab conversion for the Bronco but went out of business; sold molds,etc. to JBG.
Mark of JBG e mailed me back in JAN and wrote; "...We did buy their molds, but they are so bad, we have to restore all of
them before we can start making product. Should be available this summer.
Thanks, Mark."
do have some pics tho of this fg conversion from CP; http://web.archive.org/web/20021017172047/....com/bronco.jpg
http://web.archive.org/web/20021017171157/...om/bronc2in.jpg
parts depiction by Creative Products - http://web.archive.org/web/20021017172833/...ges/hckitin.jpg
original description without pics - http://web.archive.org/web/20011020014444/..._conversion.htm
We did buy their molds, but they are so bad, we have to restore all of
them before we can start making product. Should be available this summer.
Thanks, Mark."
btw, Classic Roadsters II, Centre, MN is making a tonneau style and possibly a full size soft top for the Bronco. They have their own upholstery shop that has been in the custom/kit business for about 28 years and have produced soft tops for cars as well as full interiors, so experience is top of the line.
They will be made of Haartz nylon material, a material used by some major auto & boat manufacturers, and it would come with either a clear or tinted window.
The top will mount using the existing hard top holes, so you will not have to drill any holes; the tailgate section will be secured with an industrial strength velcro, so no drilling will be necessary there either. The tonneau style top will cost $375.00, and the full soft top will be $500.00
http://www.classicroadsters.com/
At present, there is currently no info on the Broncos there yet, but you can still take a look and see the work they have accomplished.
Bill Scott wrote to me in late OCT - "We have one of the tonneaus done and here, I have fitted it on my Bronco and found that we needed a few adjustments...opening a new store in town and have been really busy with that, so hopefully once that is up and running we can focus on the tops again..."
rebelyelltex
New member
i am so ready to get rid of that heavy old topper..
Broncosaurus!
New member
ME TOOOOO. Has anyone done anything to change the tailgate and window system? Like a regular truck topper or any other SUV or MPV that will let you open the back without waiting 10 minutes for the window to go up or down?
not much has been done on this exc for one chop job;
F 150 Tailgate pic \in an 82
Source: by Mark L at 4wheeloffroad.com http://www.4wheeloffroad.com/featuredvehic...82_ford_bronco/
Broncosaurus!
New member
guess i'm on my own then, oh well, soft top will solve my problem
whitey
New member
anyone know where to actually get one that isn't fast back style? ever since STC has folded i have searched and searched and cannot find one for big broncos only for earlier models. DAMMIT i should have gotten one this summer. anyhow any info on where to find a regular snap on style- if there is one- would be a great help.
Last edited by a moderator:
olddog82
New member
if you are looking for soft tops try jeffsbroncograveyard.com,they have 2 dif styles fastback and one were you can roll up all windows
