Sag pump install

Status
Not open for further replies.

boss

New member
Joined
Mar 17, 2007
Messages
46
For more flow and better performance, you can't beat a sag.

The old pump



remove the intake hose for more room



remove fan belt



I have a hydroboost on my bronco thus the braided lines



remover the 4 bolts holding the AC pump in place



I used a strap to hold it up out of the way, take care not to bend the ac lines



Remove the bolts that hold the pump and bracket in place



Heres my old pump in front of 3 sags, couple are off of 351 engines and one is from a 5.0, regardless the brackets are all the same





add the adapter I need for my braided fittings



Heres the hole with the pump and bracket removed



dropping the sag in place



bolt the ac pump on



looks like it belongs



stock belt fits



need to make a longer line











pic of the hydro boost from a f450



finish off with the install of the intake hose





little tight to get the cap off



thats it, fill it up and bleed - proper way to do is is by disconnecting your drag link and cycle the wheel back and forth - no whining.

:D /emoticons/[email protected] 2x" width="20" height="20" /> more of my bronco here http://www.4x4preservation.com/forums/forumdisplay.php?f=23

 
Last edited by a moderator:
Status
Not open for further replies.

Members online

Forum statistics

Threads
21,451
Messages
124,825
Members
23,284
Latest member
texashawk001
Top