Rotors

[Cocobum]

Im trying to take off the rotors on my 96 bronco so i can have them resurfaced. So far i have almost taken the whole manual locking hub (It is a Warn hub that was converted from auto to manual) apart, I have taken the inner portion & snap ring out. But for some reason the outer portion won't budge, the Haynes manual says that need a special "puller" to get the outer part of the hub out. I was wondering how exactly do i get the outer piece of the hub off with or without the puller? To the best of my knowlage all snap rings or anything that would stop the hub has been removed

Also which manual is better Chilton or Haynes?

Any Help would be greatly appreciated

Thanks

 

[Roadkill]

Here is an article that has a good walkthrough with pictures on how to remove the locking hubs. The article is for changing balljoints, but you have to remove the locking hubs and the hub/rotor assembly to get to the balljoints.

http://ford.off-road.com/ford/article/arti...l.jsp?id=198389

Hope you find it usefull.

 

[Roadkill]

Sorry for the bad link in my last post. Here is the right link.

http://ford.off-road.com/ford/article/arti...l.jsp?id=198389

Fat fingers! :wub:

 

[Cocobum]

Thanks for the site it helped a lot