How to install distributor 5.8

Disclaimer: Links on this page pointing to Amazon, eBay and other sites may include affiliate code. If you click them and make a purchase, we may earn a small commission.

C

Cattlerest

Guest
I got a 1990 with a 5.8 distributor was already out when stabing the new distributor #1 is at TFC ON COMPRESSION STROKE without a doubt. The harmonic balancer looks good pointer is pointed to 0 degrees pulled spout connector set base timing to 10 degrees BTC plug spout back in will not start. Tested coil no spark replaced coil tested ignition modual  and PIP all good. It will start with the base timing set to 10 degrees BTC but dies within mins as if it was shut off by the key. Any help appreciated.

 

miesk5

96 Bronco 5.0
Staff member
Moderator
Joined
Oct 18, 2005
Messages
9,071
Reaction score
1,018
Location
Floating in the Pacific
Yo C,

Welcome!

Try a Self Test for Diagnostic Trouble Codes (DTC)s by my pal,  BroncoJoe19
Post any Code(s) here 

A helper can assist you by counting the codes. Some use their smart phones to record them.
BEWARE OF FAN, BELTS, PULLEYS, HOT HOSES, IGNITION HIGH TENSION WIRES, AND ENGINE COMPONENTS
Or ask local mom and dad parts stores if they will test it for you. The majority of parts chain stores tests just OBDII vehicles now.
Or purchase a coder reader such as;
 "Innova ODB-1 and we generally recommend getting the extension cord with it, so you can work the ignition key in the cab while watching/holding the reader. It will save the codes but knowing when to go through the cycles and ensuring you get it right the first time can save time and hassle, especially if you're working on it by yourself, as most of us do." by BikerPepe`



For a good crank, but no run, see https://troubleshootmyvehicle.com/ford/4.9L-5.0L-5.8L/how-to-troubleshoot-a-no-start-1

If spark test is ok, dwell on fuel pressure;

Pull the fuel pressure regulator vacuum line; there shouldn't be any gas or aroma thereof in it.

You can use a NOID light to test injectors for the no run.

https://easyautodiagnostics.com/misc-index/noid-light-tool-review-1

Our former mom and pop parts store lent them out to customers with a small refundable deposit.  They retired and new owner sells Chinese junk parts.

GL!

Al

 
Last edited by a moderator:

Members online

No members online now.

Latest posts

Forum statistics

Threads
22,509
Messages
135,880
Members
25,108
Latest member
Utahstroke
Top