alternator harness wiring

[rogmit]

I've got an alternator harness problem. 5 years ago I put one of these one wire alternators on my 1992 bronco 5.8.Now I need to put the harness back on and put a regular alternator back on it.I dont't remember where the one wire withe fusible link goes.Does anybody know or do they have a diagram?:

 

[miesk5]

yo R,

Link J (12 gauge, Green from Battery to Alternator)

this FL is gray in 96

Chilton Diagram

http://content.chiltonsonline.com/content/images/WD/Ford/177/WD_Ford_177426.pdf

Connector, IAR Burn-Up, Ford; "...Due to a design flaw from the factory these units are prone to burn up. When replacing these units it is very easy to spread the wiring harness connectors. When this occurs, an electrical arcing takes place and will burn out the unit and harness. Due to excessive heat buildup at the output terminals the original plug is usually brittle and cracked, this is not something distinguishable by the ***** eye. Chances are it is damaged and not useable. You will notice that OCA IAR units come with a brand new wire plug and installed with dielectric grease..."
Source: by mrreman.com via web.archive.org

:Later I or amother Moderator will move this post to 80-96 Ford Bronco Tech Support

so it will be ezier to find and read for others that may need some of the info, ok?