67 Got Stripped

[mike45tx]

I have a 67 Bronco, 4WD,stock suspension. I'm needing all the steering componets from the pittman arm down to the frt. tires. Also need the frt. sway bar (I think that is what is called) that bolts to the left frt. up on the frame and goes down to the frt. diff. I'm looking at # 6675 Steering Rod Kit, but not sure if it will fit,I can not find anything on the sway bar. This is a hunting vehicle that was stripped at the ranch about 2 weeks ago. Also looking for both complete doors as well. Thanks for the help.

Mike

 

[STLKIKN]

Not sure where you got the part #6675... but you do need the 66- 75 style steering, and I believe the "sway bar " you refer to is actually the track bar, you will need one from a 66-70 1/2 with a dana 30.

 

[mike45tx]

That part # is from Jeffs B/Graveyard. Trying to make sure it is the right part before ordering it. Any ideas on finding that track bar as a stock item since I have stock suspension ? Thanks for the info.

Mike

 

[Bully Bob]

Yep...,The "drag-link" & tie rod kit is #12725 at JBG (unless my cat. is old)

"bolts to the left frt. up on the frame and goes down to the frt. diff." This is the track-bar.....JBG will have these used ....& get the bushings as well.

Check to be sure the holes it mounts to on the frame end aren't oblonged. This can be fixed if they are... B)