c6 transmission

[gibs0n06]

im getting ready to put a c6 in my bronco it came with a manual but goin to auto for city driving will the transfercase on my manual trans work on my c6 and what else will i need to do for the swap

thanks

andrew

 

[Broncobill78]

im getting ready to put a c6 in my bronco it came with a manual but goin to auto for city driving will the transfercase on my manual trans work on my c6 and what else will i need to do for the swapthanks

andrew

Your existing transfer case *should* work but as I recall what you'll need to do is to be sure you have a 4x4 transmission with a tailshaft that mates. You can't use any ole' C6, it needs to be from a 4x4 and it needs to have an output shaft that fits the NP205 (or 203 if you have full-time 4wd)

 

[Bronco Phil]

Your existing transfer case *should* work but as I recall what you'll need to do is to be sure you have a 4x4 transmission with a tailshaft that mates. You can't use any ole' C6, it needs to be from a 4x4 and it needs to have an output shaft that fits the NP205 (or 203 if you have full-time 4wd)

you also have to change the small bar from the two rods coming out of the transfer case straight bar for autos and z bar for stick shift