Turn Signal Trouble
- Thread starter cdog
- Start date
Disclaimer: Links on this page pointing to Amazon, eBay and other sites may include affiliate code. If you click them and make a purchase, we may earn a small commission.
STLKIKN
New member
Your Emerg and your signals SHOULD be on separate fuses
(emerg should have its own fuse..)
Make sure you have a good ground at the dash.
Do your brake lights work, the power for the brake lights goes through the signal
switch to get to the tail lights...
Are you getting any clicking from either flasher unit. (there are two, one for each circuit)
(emerg should have its own fuse..)
Make sure you have a good ground at the dash.
Do your brake lights work, the power for the brake lights goes through the signal
switch to get to the tail lights...
Are you getting any clicking from either flasher unit. (there are two, one for each circuit)
Last edited by a moderator:
texar72broncoboy
New member
- Joined
- Jun 10, 2004
- Messages
- 62
- Reaction score
- 0
my step dads was doin that and he took some tape and balled it up and stuck it under the switch and it started workin but its just the peice in the column trhats doin it
G
gary d jones
Guest
I have a 76 and had the same problem After checking circuit and fuses and all I put a ground strap from the intake manifold to the right fender and all works fine now.
