Rear Seat

Disclaimer: Links on this page pointing to Amazon, eBay and other sites may include affiliate code. If you click them and make a purchase, we may earn a small commission.

Davo

New member
Joined
Mar 28, 2011
Messages
5
Reaction score
0
Location
Carthage, TN
I bought my first Bronco but it does not have a rear seat? Any suggestions on what to about finding a rear seat? Thanks

 

miesk5

96 Bronco 5.0
Staff member
Moderator
Joined
Oct 18, 2005
Messages
9,071
Reaction score
1,018
Location
Floating in the Pacific
yo,

As Ron advised;

For a YARD SEARCH on-line, I use;

http://www.mypartshop.com

Select All Parts

year, etc, then FORD TRUCK

Here are some returns for zip code 37030 (I used info you provided in your Profile)

95 BRONCO Seat, Rear

TAN LEATHER 0 030359

$200.00 114 Call Davis Salvage

606-528-3951

800-442-7876

701 SW 20th Street

Corbin KY 40701

95 BRONCO Seat, Rear

2DR-XLT GRN TAN LEA BENCH 103 110038

562947 0.0 $150.00

502-361-2629

800-828-1075

Baird Auto Parts

Donald, Keith, Barry

502-361-2629

800-828-1075

8809 National Turnpike

Fairdale KY 40118

95 BRONCO Seat, Rear

TAN CLO 0 051207

12438 0.0 $75.00 135 Call Davis Auto Parts

423-626-3438

877-671-3438

etc

 

miesk5

96 Bronco 5.0
Staff member
Moderator
Joined
Oct 18, 2005
Messages
9,071
Reaction score
1,018
Location
Floating in the Pacific
yw

GL!

BTW from my 96 Bronco Workshop Manual = to your year

The Bronco has a fold-down rear seat. A rear seat back release latch on the lower right side of the rear seat is lifted to unlock the rear seat back frame. The rear seat back frame is folded to the cushion. A rear seat back release latch located at the center rear seat cushion frame (63160) is lifted to unlock the rear seat cushion frame from the floor-mounted rear seat back latch striker (62440). The rear seat cushion frame folds forward to provide a flat storage area.

All folding seats have a rear seat back release latch designed to hold the rear seat back frame in the normal position.

The rear seats can be folded down to gain access to the storage compartment.

If the rear seat back frame will not latch into position or the rear seat back release latch will not unlock, remove the side shield and/or remove the rear seat back cover (66600) far enough to inspect the rear seat back release latch. Replace defective components of rear seat back release latch.

See attached 96Rear SeatBronco thumbnail for Parts diagram

Item Part Number Description

1 55929-S2 ***** (2 Req'd)

2 98605B28 Plate, Rear Seat Cushion Scuff (1 Req'd) (LH Side Only)

3 613A38 Rear Seat Back Frame

4 387871-S2 Bolt (4 Req'd)

5 383493-S2 Washer

6 67412 Latch Assembly — Rear Seat Cushion

7 604K22 Rear Seat Cushion Torsion Bar

8 N804266-S2 ***** (4 Req'd) (RH Side)

9 385329-S2 Bolt

10 60514 Rear Seat Back Pivot Bracket (1 Req'd) (LH Side Only)

11 387871-S2 Bolt

12 383493-S2 Washer

13 111B42 Rear Floor Pan Opening Cover Plate

14 62440 Rear Seat Back Latch Striker

15 387871-S2 Bolt

16 378444-S Plug

17 67438 Check Spring

18 67440 Check Spring Retainer

19 63160 Rear Seat Cushion Frame

20 382552-S100 Washer

A — Tighten to 54-81 Nm

(40-60 Lb-Ft)

B — Tighten to 16-24 Nm

(12-18 Lb-Ft)

C — Tighten to 18-27 Nm

(13-20 Lb-Ft)

Removal

Remove rear safety belts. Refer to Section 01-20A.

Unlock rear seat back release latch (61382).

Unlock rear seat cushion latch assembly. Fold seat forward.

Remove rear seat cushion pivot bracket bolts.

Remove spring plug buttons. Remove spring bolts.

Remove the spring, washer and retainer from the rear seat cushion pivot bracket (60520).

Remove seat assembly from vehicle.

Remove screws attaching rear seat back frame (613A38) to rear seat cushion frame (63160).

Remove the rear seat cushion pivot bracket.Remove the torsion spring from rear seat cushion pivot bracket.

Remove rear seat cushion frame from hinge pivot pins in rear seat cushion pivot bracket.

Remove rear seat cushion frame.

Installation

Follow removal procedures in reverse order.

Remove the damaged bolt for the anchor reinforcement and discard. Install a new bolt with the same part number as indicated.

Tighten screws attaching rear seat cushion pivot bracket to rear seat cushion frame to 16-24 Nm (12-18 lb-ft). Tighten screws attaching rear seat cushion pivot bracket to rear seat back frame to 18-27 Nm (13-20 lb-ft). Tighten spring bolts to 54-81 Nm (40-60 lb-ft). Tighten bolts attaching rear seat cushion pivot bracket to floor to 54-81 Nm (40-60 lb-ft). Check the seat for correct operation.

Safety Belts, Rear Seats, Bronco

see thumbnail 96Safety BeltsRearOutboardBronco

Retractor and Tongue

Removal

SPECIAL SERVICE TOOL(S) REQUIRED Description Tool Number

Safety Belt Bolt Bit (No. 50 Torx®) T77L-2100-A

Remove shoulder strap guide cover. Remove the upper anchor bolt using Safety Belt Bolt Bit (No. 50 Torx®) T77L-2100-A.

Remove quarter trim panel. Refer to Section 01-05.

Remove the retractor anchor nuts from rear safety belt retractor and tongue and lower anchor bolt using the Safety Belt Bolt Bit.

Remove the rear safety belt.

Installation

Follow removal procedures in reverse order.

Check sealer around floor anchor bolt holes and, if required, add Ford Caulking Cord D6AZ-19560-A or equivalent meeting Ford specification ESB-M4G32-A.

Install and tighten anchor bolts to 35-45 Nm (26-33 lb-ft).

Check the restraint system for proper operation.

Safety Belts, Rear Outboard, Bronco

Buckle End, Bronco

see 96Buckle EndBronco

Removal

At the back of the rear seat, remove the anchor bolt for the RH or LH safety belt buckle end, as necessary.

Remove the RH or LH rear seat cushion belt shield insert as necessary.

Feed the buckle end assembly down through the seat cushion and pull it out from the back before anchoring it to the floor.

Installation

To install, reverse the removal procedure. Tighten the anchor bolt to 35-45 Nm (26-33 lb-ft). Check the restraint system for proper operation.

96Safety BeltsRearOutboardBronco.gif

96Buckle EndBronco.gif

96Rear SeatBronco.gif

 
Last edited by a moderator:

Members online

No members online now.

Latest posts

Forum statistics

Threads
22,509
Messages
135,878
Members
25,108
Latest member
Utahstroke
Top