Power Steering from old mustang

[ToddJerad]

Found some nice PS parts including pump, valve and I guess the ram? (not sure what the ram refers too) off a 70 mustang but was curious if anyone has done this conversion and if it will work. I am getting a little sick of the manual steering with big 33 mudders but don't want to fork over the grand to do it either from the other swap outs. Thanks

 

[Yardape]

I think the PS is the same as on my old Mavericks. They have a completely different steering setup as a Bronco. To be fair I have never seen the steering setup on the early Broncs but I'm pretty sure its basically the same as my Bronco. The steering ram and tie rod ends are on the back side of the knuckles where the Bronco has the tie rod ends on the front.

 

[Yardape]

And th Bronco uses a power steering gearbox where the mustang uses a hydraulic ram to assist the steering.

 

[Customjob]

There is a power steering kit i see on ebay reserve is set at 200 in phoenix, arizona.

item numer is 180349572024 hope this helps.

 

[ToddJerad]

Thanks guys, I am watching the ebay item now. Appreciate all the help.