ok so i bought the the fly-wheel but 1 more question

[1978 bronco love]

<_< ok so i bought a brand spanking new fly-wheel today but i don't kno weather or not to replace the cluch i bought the truck with the werped fly-wheel so i dont know weather on not to change it we'll i have the tranny droped or if it looks good leave it in or just change it any way i don't know wut i should doo??? :closedeyes:

 

[Leadsled]

CHANGE EVERYTHING!! Go with a new throwout bearing, clutch, have the pressure plate surfaced etc. etc. You dont want to be dissapointed when you put it all together and you have a bad chatter or a few months down the road a bearing starts whining. A new clutch kit shouldnt be too expensive and that what I would do.

 

[1978 bronco love]

CHANGE EVERYTHING!! Go with a new throwout bearing, clutch, have the pressure plate surfaced etc. etc. You dont want to be dissapointed when you put it all together and you have a bad chatter or a few months down the road a bearing starts whining. A new clutch kit shouldnt be too expensive and that what I would do.

do u have any suggestions 4 what name brand i should get i was thinking zoom but i dont know its mainly going to used 4 weelin??

 

[Mike G]

Just remember the bigger the clutch (in lbs) the harder the clutch peddle. Back in the day I put a Hays 3400 lb clutch in my 69 goat and systematically within 2 month I had rebuilt every piece of clutch linkage from the throw out arm to the clutch peddle. The stock linkage couldn't handle the pressure. But man would that thing launch after side stepping the clutch at 5 grand.

Just something to keep in the back of your noodle.

 

[1978 bronco love]

Just remember the bigger the clutch (in lbs) the harder the clutch peddle. Back in the day I put a Hays 3400 lb clutch in my 69 goat and systematically within 2 month I had rebuilt every piece of clutch linkage from the throw out arm to the clutch peddle. The stock linkage couldn't handle the pressure. But man would that thing launch after side stepping the clutch at 5 grand.
Just something to keep in the back of your noodle.

i was thinking about getting a stage 1

 

[Leadsled]

do u have any suggestions 4 what name brand i should get i was thinking zoom but i dont know its mainly going to used 4 weelin??

centerforce is a good one. check it out here: http://www2.partstrain.com/store/index.php...67247&Nty=1