irishrednek
New member
- Joined
- Mar 31, 2016
- Messages
- 16
- Reaction score
- 0
Hey everyone it's been awhile since I've been on here, I transferred from California to Virginia. So as the tithe says my oil pressure jumps around. A bit of history first.
I started to drive it cross country with a uhaul coming into Arizona I had a some issues with it not wanting to pull up the hills. Considering I had some bigger hills to go through in Kentucky and the Virginias I decided to pull it on a trailer. I get to the new house unload everything and check the fluids top off what's needs topped off and drove it for a week an hour or so a day no issues. I filled up the tank Sunday night went out the next morning to leave for work and it wouldn't start. Found out that it was some watered down gas so I put some seafoam in and things worked great until the other day u noticed the oil pressure needle went from the middle to right on the N. Then the needle starts jumping around b,UT it never hit the low. It would hit the line and bounce back up to the N. When the needle would even out it would edge closer to the low line.
I was messing with it tonight and when I held the rpms at 2 everything was fine when it dropped down the needle would jump around then steady out. And randomly it would jump the steady out.
You guys are the pros here and yall have helped me in the past I'm hoping yall are able to point me in the right direction this time as well.
I started to drive it cross country with a uhaul coming into Arizona I had a some issues with it not wanting to pull up the hills. Considering I had some bigger hills to go through in Kentucky and the Virginias I decided to pull it on a trailer. I get to the new house unload everything and check the fluids top off what's needs topped off and drove it for a week an hour or so a day no issues. I filled up the tank Sunday night went out the next morning to leave for work and it wouldn't start. Found out that it was some watered down gas so I put some seafoam in and things worked great until the other day u noticed the oil pressure needle went from the middle to right on the N. Then the needle starts jumping around b,UT it never hit the low. It would hit the line and bounce back up to the N. When the needle would even out it would edge closer to the low line.
I was messing with it tonight and when I held the rpms at 2 everything was fine when it dropped down the needle would jump around then steady out. And randomly it would jump the steady out.
You guys are the pros here and yall have helped me in the past I'm hoping yall are able to point me in the right direction this time as well.