wischbronc68
New member
my 68 bronco clutch went out yesterday. I stepped on the pedal and felt almost nothing and when I tried to downshift (3 speed, column shift) it wouldnt go into gear. I was able to get it back to my shop in 2nd, not stopping and timing the traffic lights (it was really late). I picked up a clutch kit from Napa (torrance auto parts) and am about ready to start the replacement. My approach will be to remove the starter, crossmember, driveshaft, exhaust crossover, clutch linkage, pull the trans and transfer case, remove the pressure plate, clutch disc, bearing and bushing, bellhousing and release lever, and finally the flywheel. Hope this sounds about right, considering I have no service manual and cant find any good step by step removal instructions. Feel free to post any advice or secrets you may have on this task and I will post some pics as I progress towards completion. Crossing my fingers and hoping for the best.