Need help identifying this piece. Please help

[jasindude1]

Doing my control arm am I found this, the stud with threads, the passenger side has the same, but nothing attached? Is there supposed to be a brushing of some sort or did something fall off? Idk what it’s called but if I need it I want to buy it and reinstall. Any help would be greatly appreciated. Thanks!

 

[husmann]

Shock absorber mount.  These models had "Quad Shocks" on the front.  You can get by with two, but it will ride better if you have four. 

Derek

 

[miesk5]

Yo jasindude1,

In attached quad shock parts diagram;





Item


Part Number


Description




1


805348


Nut and Washer




2


802084


Washer




3


18198


Insulator




4


5A333


Front Spring Upper Mounting Retainer




5


40949


Bolt




6


18124


Front Shock Absorber




7


620468


Nut




8


620469


Nut




9


18126


Shock Bracket




10


3405


Radius Arm (RH)




11


3A292


Radius Arm (LH)




12


805033


Bolt (Must Be Installed in Direction Shown)




13


605921


Bolt




14


58740


Bolt




15


40954


Bolt




16


18A151


Front Lower Shock Bracket (RH)




17


18A153


Front Lower Shock Bracket (LH)




18


N806085


Nut and Washer




19


390678


Stud




20


5A349


Retainer




21


N800895


Nut




22


5310


Front Coil Spring




23


5A307


Lower Spring Seat




24


5414


Front Spring Insulator




A


—


Tighten to 34-47 Nm
(25-35 Lb-Ft)




B


—


Tighten to 18-24 Nm
(13-18 Lb-Ft)




C


—


Tighten to 34-46 Nm
(26-33 Lb-Ft)




D


—


Tighten to 60-80 Nm
(44-59 Lb-Ft)




E


—


Tighten to 433-460 Nm (320-340 Lb-Ft)




F


—


Tighten to 26-34 Nm
(19-25 Lb-Ft)




G


—


Tighten to 326-352 Nm (240-260 Lb-Ft)

 

[jasindude1]

So i just checked my truck, these isnt a hole on the top where the spring sits for another shock to be mounted? is this something that can be modified? I would love to add another shot to the front end

 

[Skitter302]

I've noticed that the axles will come with a lower mount even if it is a single shock set up. If you want to do 2 shocks per side you'll have to swap in the correct upper shock mount.

i.e.

 

[miesk5]

Yo Jasin,

To convert to quad shocks, 2 per side, see Quad Installation in a 95
Source: by gretna1970