Nasty shake

Disclaimer: Links on this page pointing to Amazon, eBay and other sites may include affiliate code. If you click them and make a purchase, we may earn a small commission.

Mitch

New member
Joined
Sep 30, 2005
Messages
4
Reaction score
0
Once the truck is warmed up. In first gear it feels like a earthquake. Not all the time, thank god. I have 5.5 in of lift w/ 33's. The drive train is beef up. Any takers. Thanks Mitch Getting ready for paint in 4 days...If this helps It has a 302 bored 30 with a 351 cam and timeing order. A eld 650 carb and some other good stuff

 
Last edited by a moderator:

Seabronc

New member
Joined
May 22, 2004
Messages
7,315
Reaction score
35
Location
North of NYC
Once the truck is warmed up. In first gear it feels like a earthquake. Not all the time, thank god. I have 5.5 in of lift w/ 33's.  The drive train is beef up. Any takers.    Thanks Mitch      Getting ready for paint in 4 days...If this helps It has a 302 bored 30 with a 351 cam and timeing order. A eld 650 carb and some other good stuff
27617[/snapback]

That's what she said :lol:

 
OP
OP
M

Mitch

New member
Joined
Sep 30, 2005
Messages
4
Reaction score
0
I want what your drink'n..... :))   :)) Could you elaborate.....?

27624[/snapback]

Hey Bob i'm not going to blow smoke up your SSA. I did end up kissing the porclein Queen last night. It went a little something like this AAAAAAAAAAAHHHHHHGGGGGGGG SPIT AAAAAAGGGGHHHHH

Good times.....The rear end jumps and twist rather than the wheels spinning. Do traction bars go bad ? What do you think..Oh Beer and Yager then we met up with my buddy Jose. Not a good mix Thanks

 

Bully Bob

TOP GUN
Moderator
Joined
May 23, 2004
Messages
3,844
Reaction score
12
Location
Boulder City, Nevada (Las Vegas area)
That's funny..... "Been & done"....... :-&

Naw, the traction bars probably don't do much if they're the short, single rod.

Springs wrap/flex around the axle

Prob. need some good traction bars like Duffs.

Where it really shows up, is backing up in soft dirt or sand.

Oh, & it's "Driving the porclein bus" ;) /emoticons/[email protected] 2x" width="20" height="20" />

 
OP
OP
M

Mitch

New member
Joined
Sep 30, 2005
Messages
4
Reaction score
0
That's funny..... "Been & done"....... :-& Naw, the traction bars probably don't do much if they're the short, single rod.

Springs wrap/flex around the axle

Prob. need some good traction bars like Duffs.

Where it really shows up, is backing up in soft dirt or sand.

Oh, & it's  "Driving the porclein bus"  ;) /emoticons/[email protected] 2x" width="20" height="20" />

27665[/snapback]

Thanks BOB...I'll give the diit trick a try. I can't remember if it does it in reverse it 's been so long since I drove it. I took it apart to paint. First and last time I do body work and paint my self. The good news is tommorrow it will be done. Thanks for the tip....Later Mitch

 

Members online

No members online now.

Forum statistics

Threads
22,706
Messages
137,151
Members
25,444
Latest member
Sandoval_broncosauria
Top