My rig.

Disclaimer: Links on this page pointing to Amazon, eBay and other sites may include affiliate code. If you click them and make a purchase, we may earn a small commission.

KJEfting

New member
Joined
May 14, 2006
Messages
84
Reaction score
0
Location
Ogden, Utah
Funny part about this picture is that I paid $5500 for the bike and only $500 for the bronco! I pretty much stole this bronco. I'll list the specs and what I've done to it. This bronco runs like a top, drives like new. The body is shot, but it is as mechanically sound as a new car. It is all original and runs like it has another 100k left in it. Everything works on this bronco (except the rear window).

da6e0f43.jpg

1993 Ford Bronco XLT 218,000 miles

351 Windsor

Borg Warner 1356 T-Case

E4OD Tranny

Manual locking hubs and a good old manual shift T-case.

JVC CD/MP3 player and Kenwood speakers all around.

A/C and cruise still work.

I bought it for $500 and had to put some money into it initially. Here's what I've done so far.

Replaced

Starter

Battery

Oil Pan Gasket

Upper and lower ball joints

Axle joints

Both passenger and driver's side window motors.

Water Pump

Seat Covers

Rebuilt the hubs

New pads/rotors/drums

So I've got about $1500 into it and with the exception of the back window, there isn't a single thing wrong with it. What do ya'll think?

 

firelt90bronco

Ask me about my job
Joined
Nov 17, 2005
Messages
1,020
Reaction score
4
Location
northeast
Nice Truck! Welcome to Broncozone. I paid $1000 for my 90 and yours is newer and cheaper! But I only have 166,925 and under 10,000 on the rebuilt 302 and AOD trans.

 

Seabronc

New member
Joined
May 22, 2004
Messages
7,315
Reaction score
35
Location
North of NYC
Welcome to the Zone > Not a bad deal and body work isn't that hard. The window is also easily diagnosed and fixed.

Good luck,

:)>-

 

Members online

No members online now.

Forum statistics

Threads
22,706
Messages
137,151
Members
25,444
Latest member
Sandoval_broncosauria
Top