Lift Kit Size???

[freeeat40]

I have a 1995 Full size Bronco. It currently has Wild Country tires size 33x12.5x15. It's time to replace the tires. I really like the size and look of these tires, but the tires do rub when making sharp turns.

Can anyone tell me what minimum size lift I need to put on to stop the rubbing with this size tire and a 1995 Bronco?

What is the best way to add this minimum lift, suspension or body? The suspension lift seems like it would be much easier for me to do, but I would like some feedback on your experiences.

Thanks,

Er

 

[RBuffordTJ]

Should be able to go with a 4 inch lift and have plenty of clearance. If you want to clear the rub at full turn you should consider getting wheels with a higher offset from center. Most tire shops can show you what I'm talking about and Pep Boys used to (probably still do) sell simple steel wheels with different offsets for trucks.

Rick in Orlando

 

[bidibronco]

Check this out...

http://broncozone.com/forums/index.php?showtopic=7590

 

[89eddie89]

You can get away with a 2" susp. lift, but you might as well throw in some extra cash and go with the 4".

STAY AWAY FROM THE BODY LIFT

/emoticons/[email protected] 2x" width="20" height="20" />

 

[94_Bronco]

Okay, with those size tires you will have plenty of clearance with a 3" lift.

Stay away from the body lift, because with you lift the body, the only thing holding it is a few bolts and nuts. When your trail climbing they have a decent chance to break and you can watch your body slide off.

Hope this helps.