[email protected]
New member
- Joined
- Nov 16, 2017
- Messages
- 5
- Reaction score
- 0
Hi everyone and thank you in advance. I’ll start by telling you that there was nothing wrong with the heads as far as a blown head gasket. I broke a spark plug off and then an eze-out off so that left me no choice. Pulled it all apart sent the heads out and had them checked and new seals installed. Reassembled everything but did not mark distributor. Found TDC got it to start but it is running at 3500 RPM’S and white smoke was coming out. Ran it for a minute or so then cut it off. Next day started it again and had no smoke but still had the idle issue. Thinking the smoke was from coolant that got in the exhaust pipes. Messed with the timing moving it one tooth to each side but wouldn’t start. Moved back to original position and 180 around.
At this point back to original position that runs at 3500RPM. I’ve triple checked plugs for everything and vacuum lines. I’m I off track? Could it be a vacuum leak, pvc valve or still a timing issue.
At this point back to original position that runs at 3500RPM. I’ve triple checked plugs for everything and vacuum lines. I’m I off track? Could it be a vacuum leak, pvc valve or still a timing issue.