68 bronco foor

[af ford able]

replacing front floor pans and half the crossmember on the drivers side on a 68 bronco is there a step by step procedure for this repair or as they just giver and get it done any advice i can get would be greatly appreciated thanks

 

[Seabronc]

The only comment I have about replacing metal is, make sure you cut out all the old rusted meta. If you don't it will come back to haunt you. Spot welding the new metal in would be a good idea.

Good luck,

>-

 

[Shwagy357]

http://www.broncofix.com/Tech/floor/Floorpans.htm

I dont know if youve checked this website out yet, it might be useful to ya.

My advice is start the project with an open mind, take your time and do it right the first time. Dont set deadlines for yourself. Good luck and i would be happy to try to answer any specific questions you may have.

 

[af ford able]

http://www.broncofix.com/Tech/floor/Floorpans.htmI dont know if youve checked this website out yet, it might be useful to ya.

My advice is start the project with an open mind, take your time and do it right the first time.  Dont set deadlines for yourself.  Good luck and i would be happy to try to answer any specific questions you may have.

17843[/snapback]

​

thankyou for the help that page is exactly what i was looking for i will check out that sight [ bronco fix.com ] thanks again .