460 engine swap info please

[skiles76]

I've got an '86 bronco with a 5.0 that the fuel injection is shot in the tranny is also on its last leg. My dream is to take the 460 from a '75 pickup i have and install it in the bronco. My question is what do I need to change other than the tranny. I want to leave the axles, and transfer case if possible. It is a carburated engine so i'm not worried about the wiring so much. Any help would be much apreciated.

thanks.

 

[mbtech2003]

i found this on the internet /emoticons/[email protected] 2x" width="20" height="20" />http://www.landlproducts.com/Kit4.htm

 

[Minnesotabronco96]

will it fit?

 

[skiles76]

yeah it will fit i've seen it a few times in f-series trucks of the same year. it even came stock.

 

[mbtech2003]

make sure u use headers and not maniflods. they will warp and break the bolts >-

 

[dicain]

make sure you dont have emissions in your area, or they will ruin your day. if not you need headers, engine mounts, distributor, starter, radiator, fan shroud, and a few other parts.

 

[skiles76]

make sure you dont have emissions in your area, or they will ruin your day. if not you need headers, engine mounts, distributor, starter, radiator, fan shroud, and a few other parts.

30350[/snapback]

​

i live in nebraska so no emissions. I have all the rest from a the '75 they'll work right?