spark problems

Disclaimer: Links on this page pointing to Amazon, eBay and other sites may include affiliate code. If you click them and make a purchase, we may earn a small commission.

broncjay

New member
Joined
Jan 14, 2007
Messages
1
Reaction score
0
i have a 93 bronco with 5.8 engine and i have no voltage at the coil on either side. have checked wires and no shorts or broken wires. would the control module cause this or something else.vehicle has been setting up for about 3 years.

 

Big Country

New member
Joined
Aug 18, 2006
Messages
348
Reaction score
0
Location
San Antonio, TX
have you checked the voltage on either side of the ignition module? is trying to start or anything?? A little more info is needed

 

Seabronc

New member
Joined
May 22, 2004
Messages
7,315
Reaction score
35
Location
North of NYC
Check fuse U in the engine compartment fuse box. It supplies the 12V to the coil.

Good luck,

:)>-

 

pastorbud

New member
Joined
Sep 18, 2006
Messages
30
Reaction score
0
i have a 93 bronco with 5.8 engine and i have no voltage at the coil on either side. have checked wires and no shorts or broken wires. would the control module cause this or something else.vehicle has been setting up for about 3 years.
I'd look those wires over real good, including inside the protectors and at the connection ends. I replace the ECM, the pick-up coil, and the coil, distributor cap, rotor, and igntion wire-- only to find I had a broken wire inside the cover where the wiring harness to the computer bolted to the fire wall.

 

Members online

No members online now.

Forum statistics

Threads
22,522
Messages
136,005
Members
25,129
Latest member
Boone_23
Top