Replacing solenoid on 1969 Bronco

[olsonr]

I recently replaced the solenoid on my 69 bronc and now i have no power when i turn the ignition? Is there something i did not do?

 

[Bully Bob]

Hi olsonr, welcome.,

Wellllll., not real clear., why did you replace the old one.?

You said "recently replaced" Did the new one work for a while..?

Did you clean the attach point on the fender-well to make a good ground..?

Do you have a "volt-meter", or one of those little test lights..?

What does "no power" mean..? RU saying the gages don't cycle &/or when you turn the key, nothing happens..?

 

[olsonr]

Hi olsonr, welcome.,

Wellllll., not real clear., why did you replace the old one.? i think ireplaced the original

You said "recently replaced" Did the new one work for a while..? no, just replaced today and no power

Did you clean the attach point on the fender-well to make a good ground..? yes

Do you have a "volt-meter", or one of those little test lights..? i will get one tomorrow

What does "no power" mean..? RU saying the gages don't cycle &/or when you turn the key, nothing happens..? no power....

 

[Bronc76]

Check battery terminals, (may need cleaning)

 

[olsonr]

Check battery terminals, (may need cleaning)

Thanks i will check it out....

 

[olsonr]

Clean battery terminals and unfortunately still no power....

 

[bigbluebronc]

Clean battery terminals and unfortunately still no power....

I am guessing remote starter solinod is what you changed, check wiring, I dont know but could some universal stuff wire up different, or you have old wiring or connectors the might have broken within.