next question radiators

[rojo1]

Ok Besides all my wiring issues (different post) I'm looking for a radiator and have been told this and that. The engine 302 5.0 h.0. efi out of a newer mustang to come up to speed on the truck. But the question comes down to alumnum or the reg metal, 3 or 4 core, and the high effecent. Which one is better and what do you experenced guys recommmend? The bronco will end up being a trail and rock machine not a daily driver to the trail on the weekends thats it. Any thoughts and recommendations are welcome

 

[S_bolt19]

I run a stock radiator w/5.0 efi. Not out of a 'stang though, but I haven't had any cooling issues what so ever. Try the stock rad out and see where that gets you, but if it becomes an issue, then go with the 4 core or alum. I see that you are here in the Springs, take your radiator down to Potts, down off of Lake & I-25 (behind the 7-11), and have them go through it. The guy is a Bronco guy too, so he might even cut you a deal or have a rebuilt one on hand. Maybe even check out Don Allison's junk yard, he might have a good used one too.