Intake manifolds

[Burns]

Is the intake manifold for a 302 the same or useable with the 351w, or is it only compatible with one engine?

 

[BLADE262US]

The 351W is all on its own the 302 shares the same intake as the 289 . /emoticons/[email protected] 2x" width="20" height="20" />

 

[Burns]

The 351W is all on its own the 302 shares the same intake as the 289 . /emoticons/[email protected] 2x" width="20" height="20" />

Well, there's another part I'll need.

Thanks Blade.

 

[BLADE262US]

If you need a 351W intake I have a factory 4 bbl $50 plus shipping very clean /emoticons/[email protected] 2x" width="20" height="20" />

 

[Burns]

If you need a 351W intake I have a factory 4 bbl $50 plus shipping very clean /emoticons/[email protected] 2x" width="20" height="20" />

Hmm....... would that happen to work with an EFI engine? /

 

[BLADE262US]

Nope completely different /emoticons/[email protected] 2x" width="20" height="20" />

 

[Burns]

Nope completely different /emoticons/[email protected] 2x" width="20" height="20" />

Ah well, thanks anyway. I'm sticking with EFI for now, it's too much to swap over.

On a side note, you wouldn't happen to know/have pics of the screws and caps they use on the lund visors, would you?

 

[BLADE262US]

The screws are just sheet metal screws with a 3/8 hex head . The caps just push onto the hex head . I dont have any good pics of the assembly /emoticons/[email protected] 2x" width="20" height="20" />

 

[Burns]

The screws are just sheet metal screws with a 3/8 hex head . The caps just push onto the hex head . I dont have any good pics of the assembly /emoticons/[email protected] 2x" width="20" height="20" />

Thanks. I just bought a new from the box one from a guy for $65, he bought it but decided against it, and wanted it gone AFTER he lost the bag of screws and caps. I knew they were self tapping screws, but I didn't want to get something that was gonna go through my support into the cab haha. I'm not too worried about the caps though, as long as it keeps the sun out of my eyes I'm happy.

 

[Seabronc]

Thanks. I just bought a new from the box one from a guy for $65, he bought it but decided against it, and wanted it gone AFTER he lost the bag of screws and caps. I knew they were self tapping screws, but I didn't want to get something that was gonna go through my support into the cab haha. I'm not too worried about the caps though, as long as it keeps the sun out of my eyes I'm happy.

You can get the caps at Home Depot, I've seen them there while looking for something else, hardware department. Also, your local friendly auto parts store should have them.

Good luck,

>-

 

[Burns]

You can get the caps at Home Depot, I've seen them there while looking for something else, hardware department. Also, your local friendly auto parts store should have them.Good luck,

>-

Awesome, I'll have to get some when I get the thing delivered. Thanks.