I have a 1986 Bronco II 2.9L V6, fuel injected. The starter cranks the engine like normal but it wont fire. I've changed the high pressure fuel pump, fuel filter, spark plugs, dist. cap, rotor, stator (pick-up), spark plug wires, coil, and the ignition module that sticks out the side of the distributor. I've also reset the timing. The plugs are wet after trying to start it a few times (and I can here the pump come on as well) so I know its got fuel. I set all the plugs on the manifold and had someone crank the engine to check for spark at all the plugs; its got spark (although it seems weak). The spark is not a bright blue like I was told it would be. I've changed coil twice thinking that may be the cause but it didn't fix anything. If anyone has any thoughts please help me out. Thanks, Erik