I was looking at this kit: http://broncograveyard.com/products/cat/20...SS/?o=&st=brake
Seems to be the one that matches up to my lines, but the question is, will it work on an 86 BKO? I just replaced the calipers and pads and noticed the rubber hoses going to the calipers are shot and cracked, so while trying to replace them, I had no such luck. These are the ogirinal lines and I can't remove them, so I was just going to remove all the front lines, cut the ones I couldn't get off, and dremel/drill out whatever is left and then slap some new ones in. I'm not fond of making new ones. So does anyone know where I can get the metal lines premade or can I use the above kit on my front?
I don't know if these specs are needed but supplying anyways.
4.9L
C6
Carb'd
Seems to be the one that matches up to my lines, but the question is, will it work on an 86 BKO? I just replaced the calipers and pads and noticed the rubber hoses going to the calipers are shot and cracked, so while trying to replace them, I had no such luck. These are the ogirinal lines and I can't remove them, so I was just going to remove all the front lines, cut the ones I couldn't get off, and dremel/drill out whatever is left and then slap some new ones in. I'm not fond of making new ones. So does anyone know where I can get the metal lines premade or can I use the above kit on my front?
I don't know if these specs are needed but supplying anyways.
4.9L
C6
Carb'd
