back seat brackets???

[sreaminbronco]

Hey guys anyone know how to get the three back seat brackets out the ones bolted to the floor? I have a 92' bronco and I went back there last weekend and used a wrench and it wouldn't even budget but then again I only weigh like 140lbs. and today I used the new drill I got for christmas that had a socket attatchment and I burnt it out man do those motors stink when the get burned out!!! I have an kobalt impact wrench that came with special sockets will that work?Any help would be greatly appreciated!

 

[Bronco89XLT]

The impact should get it out, soak it in some PB Blaster or another penetrating oil. I am about to tackle the same thing. Let us know how it goes.

 

[sreaminbronco]

Well that didnt work I used my kobalt impact wrench and a 3/4" impact socket and nothing happened I did it in revers and check the bolt and it wasn't moving so I did it forwards to see if it was reversed threaded and of course it wasn't. So hand tools and an impact wrench won't work.

 

[BLADE262US]

Goona have to heat it or as a last resort drill through the center of it and keep going bigger till the head pops off then drill to the right size and retap . If its a regualr hex bolt ( cant remember if its a torx) Then I would get a bigger impact like an ingersal 2131 and make sure you have a big enough air line to support it and it should twist the head off for you or take it out . Good luck ( LOL be thankful your not trying to get the seatbelt bolts out ) /emoticons/[email protected] 2x" width="20" height="20" />

 

[sreaminbronco]

I guess its not worth it then lol it's not that I'm giving up I'm just taking a very long break

 

[bornwet]

ANY OF YOU GUYS INTERESTED IN SELLING YOUR SEAT BRACKETS. I BOUGHT AN 81 WITH NO BACK SEAT. I WANT TO INSTALL A THIRD ROW OUT OF AN EXPETITION AND I NEED THE REAR LATCH. THANKS

 

[sreaminbronco]

Blade might have some but Im just taking them out to put some dynamat back there.

 

[BLADE262US]

I have the entire setup out of a 92 including the back seat its blue and perfect let me know if interested . /emoticons/[email protected] 2x" width="20" height="20" />