Latest activity
-
BBroncoBret replied to the thread Unable to shift in gear.Hi there and thanks. Looks like it is the clutch after all. I’ll work on putting a new one in. Thanks
-
Tiha replied to the thread battery drain gremlin.Would love to hear how it works. I have a couple vehicles that sit for long periods as well. -
SSuperduty 66 replied to the thread Shout out.Hey guys, its been a while since I said anything. I'm building a 331 stroker for my 95 EB. Machine shops are becoming few and far...
-
i have a battery drain on my 93 bro that i cant find so i bought this little jewel in hopes to allievate the problem **** Switch for... -
i have a battery drain on my 93 bro that i cant find so i bought this little jewel in hopes to allievate the problem **** Switch for... -
-
Just a shout out to all the members out there! Not much action in the zone lately…just sayin. Where is everybody? I’d hate to see this...
-
Bbsd4083 reacted to miesk5's post in the thread Intermittent high idle fixed; was corrosion in EEC relay with
Like.
Yo 91 EFI High Idle Tips by Mikey 350: "Take off the air intake hoses so you can access the throttle bores. Start the engine and place a... -
Bbsd4083 replied to the thread Intermittent high idle fixed; was corrosion in EEC relay.THANK YOU very much i have been on exactly this same journey with my 1987 XLT 5.0l EFI ...this is the only thing i have not...
-
Bbsd4083 replied to the thread Intermittent high idle fixed; was corrosion in EEC relay.
-
Sorry, mines a 79, I put it on a newer chassis with a S/C 5.4 from an 03 Lightning. But to me, a Bronco is a Bronco! (Im still getting... -
I started pulling the operator station to clean things out, fix the steering column. One thing led to another. The steering wheel...
-
While inspecting the tractor before purchase I saw the oil filler cap and neck were gone. Melted down into the valve cover. Also the...
-
Hey Bret, welcome to the zone! Based on your description, it sounds like the clutch may be worn out and not engaging. As the clutch...
-
You had it assembled correctly. I have had that happen before. In my case I often used heads from who knows where with unknown mileage...
