koontreeguy
New member
anyone ever put a bench seat in their bronco? if yea, could you gimme a little write up
seats
- Thread starter koontreeguy
- Start date
Disclaimer: Links on this page pointing to Amazon, eBay and other sites may include affiliate code. If you click them and make a purchase, we may earn a small commission.
Seabronc
New member
If the seat comes from an 80 - 96 F150, F250 or F350 it will probably fit with possible changes in the mounting bolt positions. You can drill new holes if necessary, but you need to reinforce the under side with a large #8 hardness washer to prevent the bolts from ripping through the floor in an accident. Take a look at how the bolt holes are reinforced for the existing seats.
Last edited by a moderator:
