broncodawg
Broncodawg
Well it took long enough but the 351w swap is done. The clutch linkage too extensive fabrication and welding but the truck is running.
New Videos & Pics
- Thread starter broncodawg
- Start date
Disclaimer: Links on this page pointing to Amazon, eBay and other sites may include affiliate code. If you click them and make a purchase, we may earn a small commission.
pitcherd
New member
Seabronc
New member
Good job 
/ .
I'd make one suggestion though. Reroute those wires so they drop strait down to the plugs. From the picture they are very close to the header pipes which get very hot and could melt or burn the insulation on the plug wires.
Good luck,
>-
/ .I'd make one suggestion though. Reroute those wires so they drop strait down to the plugs. From the picture they are very close to the header pipes which get very hot and could melt or burn the insulation on the plug wires.
Good luck,
>-
Last edited by a moderator:
