I have a 1970 Bronco. It has a 302 with 289 heads on it. I got the fuel injection system from a 1991 Grand Marquis. The system has 14 pound injectors in it. I've read that they need to stay consistent with the computer. I estimate I have about 300 horsepower and think I need 19 pound injectors. Can I use the 19 pound injectors with the computer that came with 14 pound injectors without a problem, or am I going to have to buy a new computer?
Fuel Injection Help Needed
- Thread starter brronc
- Start date
Disclaimer: Links on this page pointing to Amazon, eBay and other sites may include affiliate code. If you click them and make a purchase, we may earn a small commission.
Seabronc
New member
If the computer doesn't know what is there, it most likely won't run properly. Have you tried it? Worst that can happen is it won't work 
/emoticons/[email protected] 2x" width="20" height="20" />
Good luck,
>-
/emoticons/[email protected] 2x" width="20" height="20" />Good luck,
>-69Bronco94
New member
- Joined
- Aug 21, 2004
- Messages
- 32
- Reaction score
- 0
go to www.fordfuelinjection.com. you may be able to find some answers there.
