Bucket Seat Swap?

[mudunit77f250]

iive got a 77 f250 with a pretty rugged bench seat in it right now. the seat is worn and hard, and i was wondering if there were any bucket seats (that are comfy) that i could swap in without much issues... thanks for any input.

 

[BLADE262US]

Ford arostar seats are very easy to mount in other vehicles and are very nice and cheap /emoticons/[email protected] 2x" width="20" height="20" />

 

[Sorny]

Yes I would have to agree with Blade on that, Arostar seats work awsome for that you could also use ford Tempo or Topaz seats they work good too.

 

[Guest]

I bought a set of Qualitex seats...A little pricey but well worth it...

 

[MythotiK]

My post above...

 

[Txquadhunter]

seats from 73-96(F150) 98 on F250/350 will bolt right in. Newer seats with a few fab ups will bolt in. I put a split Dodge seat in my bronco it was easily fab'd to bolt right in. I wanted Ford seats for bolt right in but couldn't find any in good shape cheap. So the price i got on the seats from the Dodge fit the bill.

 

[mudunit77f250]

seats from 73-96(F150) 98 on F250/350 will bolt right in. Newer seats with a few fab ups will bolt in.

you are 100% positive that the swap from those fords will work?? ive listened to a few too many peeps who said this or that will swap right in, only to find out that it didnt. if your 100% sure it works then i will have to see about hitting up our junkyards and getting some seats....

 

[biggreen78]

sorry to steal your thread, but will a 90 suburban bucket seats work? i've got a 78 f150 with a terrible bench. the drivers side is so worn that when i drive i sit on an angle. its funny, but gets old.

 

[Txquadhunter]

Muddun, Yes just they are a bolt in swap on bench seats. If the seat is like a 3way bucket you'll have to drill 4 extra holes for the inter bolts. But the 4 outter bolts are the same. You can also unbolt your seat from its frame and bolt a new seat onto it.

To use the burben buckets you'll have to fab the seats to fit your seat frame or do a lilttle fabbing to mount the buckets to your truck

 

[mudunit77f250]

ok thanks a bunch.... now all i need is the time and $$$ to put in some comfy F150 buckets....