muddrivermike
Active member
Hey everyone. Trying to get some help here. I'm gearing up finally to start building my 78 460 my 78 bronco.So I'm collecting parts before the block work. Here's my dilemma. I keep looking around online and can't get a concrete answer. I'm gonna be running my square York ac compressor. No problem there. My issue is I can't seem to find exactly what I need to run the Saginaw pump. I found a diagram with the setup and pics online. But the couple part numbers for the bracket that comes off the water pump to the pump, I keep finding slight differences. One bracket is more flat, another has a slightly higher side where it meets the water pump, ect. All under the same part number. Either way I need whatever is the correct brackets. It'll have a spacer where it meets my York mount to the head, the one that mounts to the pump, and the one from that pump bracket to the water pump.. online says A 80-87 E350 with a 460 is what it would come off of. Anyone have a lead on this? I'm gonna include some pics of what I "THINK " I'm looking for. I'm NOT running that pos Ford Thompson pump. Has to be the Saginaw.. thanks ahead Mike
Attachments
-
460bracket2_716b60b2a7bd9fa5cf93954e56b406d0d4bbf10a.jpg45.2 KB · Views: 7
-
wm20191205_163848.jpg41.1 KB · Views: 6
-
Screenshot_20231203-221109.png607.2 KB · Views: 3
-
Screenshot_20231203-221046.png537.4 KB · Views: 3
-
Screenshot_20231203-221007.png633.9 KB · Views: 2
-
Screenshot_20231203-220928.png520.7 KB · Views: 5