Rear Quarter Panel

Otis1978

New member
Joined
Oct 20, 2021
Messages
2
Reaction score
2
Location
Waterford MI
While replacing the rear passenger side quarter, I noticed the bottoms of the inter structure in the front and rear of the quarter are also rotted. Anyone know if those are available anywhere? I haven’t been able to locate them.
You must be registered for see images attach
You must be registered for see images attach
You must be registered for see images attach
 

miesk5

96 Bronco 5.0
Staff member
Moderator
Joined
Oct 18, 2005
Messages
8,506
Reaction score
503
Location
Floating in the Pacific
Yo Otis197
Welcome!
BRONCONUT wrote "...I cut in to it to see what I had to do and kept cutting more and more . Ive been reading on some threads to figure out how I wanted to do this(mostly Bossinds). So now I have a little more cutting to do and wait for my rust bullet and herculinar to show up!
You must be registered for see images attach



...heres the rear support...
You must be registered for see images attach

Most of the metal are pieces I cut out of a wrecked 87 I have chopped into a million pieces now..."
Read and see more @ https://www.fullsizebronco.com/threads/chop-cut-rebuild.136707/

Inner rear wheel well panel @ https://shop.broncograveyard.com/Steel-Body/products/124/
You must be registered for see images attach





Here is some more 78 Bronco info for you:

1978 Bronco Dealer Brochure via member Indybronco

MANY 78 Parts Break-Out Diagrams by member Indybronco (Lula Mae) @ pictures, videos, and sounds | SuperMotors.net

1978 Bronco Emission Component Location Diagrams via 78brncoxlt

PARTIAL DEMO 1978 Ford Bronco & Truck Wiring Diagrams by Ford via member BroncMom @ Demo78 wiring diagram.pdf

1979 Bronco/F Series Electrical & Vacuum Troubleshooting Manual via member Ziggy; similar to 78.

1979 Wiring Schematics, Connector Pin-outs, etc by member Ranger429 @ 79 wiring schematics
Similar to 78

Bubba's M-Block Ford V8 Workshop by Dave Resch @ Bubba's M-Block Ford V8 Workshop

78 351M/400 Engine Exhaust Emission Control Information Decal & Timing by member grovermyson @ Timing - Do I need to do anything ?

Partial Chilton Manual for 1978, 1979, 1980, 1981 Bronco. Scanned by broncocity.com @ Bronco City

Ford Shop Manual Diagrams: 1978-1979 Full Size Shop Manuals, partial @ Technical Diagrams Archives
My Tablet takes too long to download, so try the first in this list as long as you have Adobe Acrobat 9 installed. Let me know if the downloads are worth the effort.
YOU WILL BE FIRST PERSON IN ALL MY YEARS HERE TO RESPOND.
Includes:
Wiring Manuals & Diagrams Download PDF
This complete manual for the 1972-1979 Ford Bronco Includes Rear Lights Diagram
Motor Manuals & Diagrams Download PDF
This complete manual for the 1972-1979 Ford Bronco Includes Air Cleaner Diagram
Chassis Manuals & Diagrams Download PDF
This complete manual for the 1972-1979 Ford Bronco Includes '78 Brakes Diagram, Gas Tank Setup Diagram
Body Manuals & Diagrams Download PDF This complete manual for the 1972-1979 Ford Bronco Includes; Upper Body Diagram, Front Clip Diagram, heater Ducts Diagram, Tailgate Diagram, Console Diagram, Front Clip Diagram, Grill Setup Diagram, Heater Controls Diagram, Interior Trip Diagram, Rear Sheetmetal Diagram, Tilt wheel Diagram, Tire Rack.

Al
 

johnnyreb

Well-known member
Joined
Feb 23, 2021
Messages
1,008
Reaction score
397
Location
West Virginia
Thanks Otis for the pictures and Mike for the information. Now what I do about these rusted out ares FIRST . Is find out where the water is coming from. Fix that. I have to get some tools and learn about welding and get me a build set up to work in. .This side cut out view picture is great. Check out the rain gutter and around the rear tire where wate comes in and the rear section --don,t forget to make a drain hole big enough for dirt to get out and have like a funnel made .So it can,nt enter. Again thanks alot for the pictures and articles Mike and Otis.
 

chrlsful

Active member
Joined
Oct 13, 2009
Messages
287
Reaction score
114
Location
S. Amherst, MA 01002-1827
some times we need the specailty equp (brake, bender, english wheel, etc). I make do w/o but it's work I don't esp like ('body wrk'). A combo of brand new, used (if upto *****) and fabded happen on rare jobs. Never better than new (the specalists & ****) a 10 yr life span wrks for me... Unfortunatly just p/u a fox waggy so will B dabbelin like-wise (35 y/o LTD 3.8, C5).
- -
s n u f f & a n a l did not get thru?
 

Members online

Forum statistics

Threads
21,746
Messages
128,183
Members
23,916
Latest member
RJobe
Top