Search results

Hi Motech, Thanks for the reply I checked all the plugs today and all looked normal, none were dry and white. Going to get it checked out by an actual mechanic tomorrow as I dont have the time or energy to futz with it at the moment hopefully nothing requiring major surgery, will update this...

Yes 95 I forgot to add its running rich, I pulled the o² sensor and it was black soot coated instead of the chalky white Also still vibrates with belt removed

Hi All, Well this ones got me stumped... I'm getting excessive engine vibration at idle in park/neutral and throughout the rev range while driving and no koeo or koer codes except the pass code. I thought it might be the crankshaft position sensor but unfortunately I do not have one, which...

Hi Tiha, Thanks for your response, I kind of was thinking along the same line as you about some metal shavings on the vss, hopefully it's not though crossing my fingers...

Hi all, Having an issue with my 1995 bronco 5.8l... My speedometer is jumping and showing incorrect speed while driving slow (0-25mph) Above 25 it seems ok. Also ABS light comes on when speedo is jumping & also shifts are hard & not at normal shift points. I'm thinking I have a bad VSS. Hoping...

HI miesk5, Thanks for info, I bought a new scan tool that can run KOER wiggle test. Currently the truck is not throwing the check engine light, I will probably have to wait until it does to get any codes while running the test. I will give it a try anyway, just to see what it says. Thanks again

Hi, Just to follow up on this I got it aligned and all seems ok... Thanks miesk5 for the help

So my "Ford code reader" probably won't do the KOER wiggle test, I think I need a real OBD1 scan tool, any recommendations?

The manual for my "Ford code reader" doesn't give instruction for a KOER wiggle test, only for KOEO. Should I just follow the KOEO instructions except with engine running? Sorry for noob question, never done the wiggle test.

Hi miesk5, Thanks for that wiggle test info, I had forgotten about that test. I will try that on my way home tonight.

Hi all, This is for my 95 bronco 5.8l 191,000mi Starting a new thread for this...I have posted about this briefly in a previous unrelated thread and thought it was resolved but apparently that was not the problem... My check engine light issue(s) have returned, I had forgotten to tighten my...

Hi miesk5, Is it ok to torque that when in the vehicle? Or should that be done off the vehicle? Thanks again

Hi miesk5, Thanks for the info, Wondering if it's possible that something in the steering gear, steering shaft or column got bent when torquing pitman arm nut (torqued to 210ftlbs haynes spec said 190-230ftlbs)? Thanks again for your help

Hi miesk5, Yes everything was lined up straight and locked during disassembly and reassembly. All notches lined up same as they did the first time. Only big difference this time was I had to take drag link off pitman arm. 

Hi all, I replaced my steering box yesterday for the 2nd time this year (first box was still loose), I followed the same procedures as the 1st time except this time I had to remove the drag link from the pitman arm and remove the pitman arm from the steering box with the steering box removed...

 Hi Miesk5, Thanks for the info on the icm, I stopped by my local Ford dealer parts dept today to pick up my new coolant temp sensor and had them lookup the icm for my bronco, using my VIN # they told me the icm for my bronco is DY1075 (the grey one). I told him I'm pretty sure the one I need...

Hi Miesk5, Thanks for the info A little off the topic but ...Do you have the correct part number for the Ignition Control Module for my 1995 Bronco 5.8l with CA emissions? Please correct me if I am wrong, but from what I understand there is some confusion surrounding this part due to an error...

OK thanks Miesk5, I have a new ECT on the way from Ford will be here monday, was cheap and easy enough to just replace, but I'll run the tests later today anyway I was also reading about high idle/check engine light issue here...

Hi Miesk5, thanks for the info I started it up this morning and about 5 seconds after startup the check engine light came on and rpm's rose to and stuck at 1200 same as yesterday, I backed out of my garage and noticed that the exhaust smelled VERY rich, I put it in drive and tried to move but...

Hi All, Thanks for the info Miesk5 gonna work on that soon, Had a weird issue on my way to and back from work today :( I was heading to work traveling about 40 mph down the road when the engine started running rough and I looked down at the instrument panel and the check engine light was...