Search results

Thought I'd stop by and share the body work pics on my Bronco, might be of interest to some of you. Take care, heres the link http://www.4x4preservation.com/forums/showthread.php?t=390

To make room for the Cage Radius Arms mounts, it is necessary to relocate the OEM transmission cross member back a couple inches. Thus requiring a fabrication of a new cross member. Some OEM pics Purchase some square 1/4" thick tubing 2 X 4" remove the transfer case skid plate...

OK so I started with a 3" High Flow Cat. 3" Mandrel Bent Tailpipe I used (30 bucks!!) : maremont part number is M30001, the Autozone sku for that part is 577061. Fitting it all together thats a Flow Master 50 all 3" The Muffler Heres the old Flow Master 40 and the hack of a job...

Heres some tease shots of my sas build, if there is interest I can post the 100 or so pics on the whole build.

This is long, sorry. My nice rusty 1/4" 4x6 6 foot long metal beam for 90 bucks I hate rust so lets get rid of it with one of these Rapid Strip Wheels. Oh that looks so much better! To keep the rust from coming back while I build I coated it with a can of rust stop Drilling some...

Best mod to my brakes yet, well the rear disc would rank up there as well. So for the lack of pics on this one, but you should be able to figure it out. Bought the pump off of ebay its for a 2001 e450/f450, it'll be amazing. Here is the pump, red line is the return line the fitting I...

For more flow and better performance, you can't beat a sag. The old pump remove the intake hose for more room remove fan belt I have a hydroboost on my bronco thus the braided lines remover the 4 bolts holding the AC pump in place I used a strap to hold it up out of the way, take...

Hi Guys, found your site today and thought I'd say hi, I have a 96 bronco, did an sas last summer and a bunch of other mods, oh - go here to see some of them http://www.4x4preservation.com/forums/forumdisplay.php?f=23 Nice site you have here