Just received a flyer in the mail today on the upcoming Texas HeatWave show in San Antonio, TX the weekend of the 24th/25th of April. Here's the lnik to the home page and listing of all events for 2010 in S.A., Houston, Austin, Corpus and Dallas:
http://www.heatwaveinc.com/
Having been to the...
Got a chance today to take some pics of the 1966 Mustang Coupe I've been working on for my neighbor. It has a '93 reman 302 V8, Edelbrock electric fuel pump, Holley carb and headers. Swapped the C6 auto out for a toploader 4-speed manual which was the original trans style. in fact, the clutch...
http://www.dfw-tx4wd.org/Megarun/MR.aspx
The 10th Mega Run at Barnwell Mt. near Gilmer, TX (East of Dallas) will be held March 5-7, 2010. It would be cool to have some Broncos represent, whether they're entered in the events or just wheeling the park. A handful of us from the Austin, TX area...
Miss Kitten's debut of the "Dark Horse" inspired me to spruce up the 78 Bronco. I never have cleaned it up, much less washed & waxed it in the 3 years I've had it. But I've had an issue with surface rust on the roof, and wanted to address it before it ate thru and ended up being a problem...
Have been busting my #$% the last few months getting done with the 84 Bronco, hoping to make a run on Memorial Weekend. I couldn't go , but I did technically 'finish' the 84 after being down since July of 2005. Four years, wow.
It started with a practice run thru my on-farm mudpit and running...
Didn't find much thru search. 1988 F350 EFI 460 motor swap into an 84 Bronco, with the smog pump and A/C deleted. Looking for belt lengths or part numbers for the two serpentine belts. One for the stock alt/crank/fan, the other for the ps pump/crank/fan. I haven't seen an A/C-bypass pulley for a...
Finally got around to testing my brake lines that I've installed into the 84 Bronco. Some I made myself, others are pre-made legnths from O-reilly's Auto Parts. I bench-bled the master cylinder, and let gravity flow take the fluid down the lines as much as possible before try to bleed the...
Jumped in the 78 Bronco today and fired it up, haven't driven it since a run right before X-mas. I was having a problem with the brakes going out, and figured it may be a leaking rear wheel brake cylinder. When I came home the other night and shined the headlights on the Bronco, I could see a...
You might pose that ? in the forums, should get lots of opinions. In my experience rock crawling, ground clearance is more important than a locker. the breakover point seems to be 35" tires where i go in the TX hill country. the Jeeps and Sami's with 31's/ 33's need lockers. The blazers and...
I''ve been looking for awhile, trying to find a pair of steel 6-degree wedges to put under the front springs on my 84 Bronco with the Dana60 SAS. I can find the aluminum ones all day long, but I''d prefer steel ones so I can tack weld them to keep from slipping out, JSM84
The paint on my 84 Bronco is looking really dull, and has lost alot of the shine. It was re-painted about 5-6 years ago with base coat and clear. What can I do to get it to sparkle again? JSM84
Currently working on the Holley Truck Avenger carb on my 460 in the 84 Bronco after replacing the blown-up 351W. Looking for a diagram or good pic of how the C6 tranny kickdown rod linkage hooks up to the carb, as well as down at the other end. The C6 came out of the same 88 F-350 as the 460...
I have a simple question that perhaps someone can answer. What is the tubing size/ diameter of the stock y-pipe for the 84 351W H.O. on my Bronco? I'm hoping to be able to re-use it on my 460, since I cut the exhaust off it to pull the motor, and the exhaust pipe ends and flanges wre badly...
I met up with Roadkill this past Sunday and headed out to Comanchee Ridge, jsut East of Bastrop, TX. IT's a small ranch on the Colorado River with a mudpit, rock crawling and steep hills. I took the 78 Bronco to pull Roadkill out of the pit when he got stuck, as well as bumming brake fluid from...
I'm planning to build my own driveshafts for the 84 SAS'd Bronco out of square tubing, and would like to hear any input from othersthat have done this mod. The stock F-350 shafts are either too long or too short, and don't have very much motion for the Bronco. i picked up two pieces of tubing...
Need some adivce on a project. We recently swapped a 4-sp manual back into a 66 Mustang that had a C6 behind the 289. Ther is now a vibration in the motor when you rev it up, and I believe it's the flywheel. Currently chekcing the casting number on the engine, but want to know if we're on the...
This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
By continuing to use this site, you are consenting to our use of cookies.