Search results

Hey guys, I tryed searching on google but couldn't find an answer to this question. I was looking at axle codes on the Vin sticker and was wondering if a 3 digit code was anything special compared to a 2 digit code. For example: This is a 2 digit axle code really easy to look up to know the...

I've got my Blue '93 Custom Package Bco with a 302 that has a E4OD that bucks at part throttle with the TC locked. The problem has been narrowed down to the transmission. Been looking on Facebook market place and with parts from an '88 Bronco I can swap in a C6 for $1k less then repairing the...

This thing is so crazy I had to share. eBay link -> https://tinyurl.com/4x44350

I was looking for a gas strut hood kit for both my Bronco's. Then I started wondering if the the 92-97 OBS kit would work? I thought the Brick nose and round nose used the same springs.  Or is there just enough of a difference that the 2 generations can't mix and match this part...

This news just hit Facebook. Fiveology Racing Removing emissions related sensors/solenoids can cause idle quality and drivability issues, especially when it comes to the Thermactor System. This eliminator kit makes it possible to remove the Thermactor System Solenoids (TAB,TAD) from your...

I was driving my '91 the other day and had the oddest thing happened, After making it about 2 or so miles into my run across town I was coming to a stop and my Bco acted like it was trying to push through the brakes and the engine died. It re-started with no issue but when I put it in drive it...

Guys, the hard part about the 87-91 Trucks is that their is no aftermarket support for these like their is for the 92-97 Trucks. I'm looking for one of these or something close to. I'd like to have one for my '91 Bco and my Centurion had one of these when it was Born but when the paint and...

It was a bit of a process but it was worth it. I found an ad on craigslist for a 1989 Centurion Classic. Over the years I have seen these a few of these on ebay, some on craigslist on the east side, but mainly I read about the 4 Door Bronco in the archive sections of forums. When I saw this one...

Got done wiring in the new EEc from fiveologyracing.com, Took the computer a lil bit of time to learn how to idle correctly. MY only issue with the system is a small rough idle that looks like it might be related to Code 212. I did some google searching and 212 might be caused by a bad 22k...

I think I have been fighting this issue the whole time but I keep adding and changing parts on the Bronco so often that its hard to tell what is what. When I'm in 3rd and watch the RPMs drop when the torque converter engages, the Bronco starts pulsing. This issue is most noticeable in 3rd and...

Bet ya'll are wondering when I'm gunna slow down on these changes to the Bronco. I guess the answer would be, "when my tools break." Ok, Bronco Suspension. Talk about a topic that probably has more threads then one could ever imagine. Here is why I'm wanting to change the springs. Under full...

Hey guys, I'm trying to put LED's in the Bronco, have an electronic flasher that prevents hyper flashing. So no resisters needed to fix that issue. I am having issues with the running lights and the Brake lights. With the new LED bulbs, my running lights turn on my LEDs at max brightness. This...

I'm working on getting all the parts to swap my Bronco over to MAF, but before I do I'm going through and fixing whats broke. Just to make sure that when the new PCM goes in I know for a fact that everything will work. On the list of things to change/clean is to put a new set of injectors into...

Are the Accessory Brackets on my 351w the same as a 302? Only reason I'm asking is I want to put a 302 in my Bco. I'm in the planning stages now and want to make sure I don't need different Brackets for the A/C or Alt or stuff like that. Currently working on a deal for a 302 HO that is out of a...

So I went on good ol amazon.com and was looking for Hop-Up parts for my bronco. Found a Trans-Dapt 2518 Torque-Curve MPFI Spacer (link) TBS(s) have been controversial since they were made,some people say they work, and most think its a hunk of metal that does nothing. Honestly I don't know...

I found this, Under the rear carpet of the Bronco. From what I understand, this is the build sheet for my Bronco that would of followed it around as it was being built to make sure it got all the correct features. I have have it in a photo frame to protect it from damage. Thought I would share.

I'm posting this to stay ahead of he curve and prep my self for what might be coming. I was working on the Bronco the other day (checking fluids nothing fancy) and I noticed a buzzing noise coming from the transmission. It isnt loud but just enough to be heard while the key is on but the engine...

Ford Pick-Up and Bronco 1980-'95 < Link I'll just put this link here for Anybody who needs a copy to look at. Most of us have the printed version but I like having a digital one too. Just wanted to Share.

Found this site and I'd say that most of the articles are correct, just wanted to share. Add this to your tool box. http://troubleshootmyvehicle.com/ford/4.9L-5.0L-5.8L/index-of-articles-1

I probably spend too much time on the internet and not enough time actually testing parts on a bench... but who cares! I'm all about that forum life XD Being on a budget I can't quite afford the 420 HP 5.0L engine that I would love to drop into my Bronco. Saving up for that will take a few...