replaced the reservoir with a new one but now the windshield wash side won't hold fluid.
there's a star washer that pushes against the pump assembly to hold it in place.
I've got it seated in as far as it will go but it's got a leak.
is there anything I can do to fix this before I seal the...
the seal in there now is dry rotted and starting to leak.
is this a one piece seal or is it comprised of several pieces?
also, what is involved with replacing the seals on top of the tail gate where the window goes up and down.
thanks.
just noticed that there is a seperation in the metal on the tailgate at the very top right side on the edge.
no rust, just a 3" long opening about 1/16" wide.
common problem?
any fixes?
thanks.
the plastic inside door handle (driver's side) on my '96 bronco broke off the other day.
usually this is no big deal to fix.
HOWEVER, the last time whoever changed out the last broken one, stripped the threads on the screw that holds the handle on.
i found another screw at the hardware store...
would anyone know the correct part # / description of the fasteners that hold the door panels and dash bezel in place?
i just bought a '96 eddie bauer that the previous owner had an after market stereo and alarm system installed.
the door panels rattle and the bezel covering the instument...
i looking at installing a steering stabilizer on the bronco.
i'm going for a monroe kit that is on the justsuspensions website.
they show two options. one being for an open channel frame, the other for a boxed frame.
underneath it LOOKS like it would be an open channel frame, but how can i be...
the last time i was under the bronco i noticed that all the rubber bushings / parts were deteriorated or worn out.
the truck came from southern arizona so heat and age took their toll.
what i need to know is what kit i should get?
i'm still learning about broncos and need your good advice...
is there any advantage to installing an after market open element type air cleaner? you know, the kind they sell at parts stores with the chrome top.
i'm wondering because my '86 bronco (351 4bbl) factory air cleaner has several air / vacuum lines going to it and also has a breather from the...
seabronc, thanks for identifying the type of carb i'm dealing with.
next question, how much can i expect to pay to have it rebuilt? like i mentioned it's a holley 4 barrel and there's a small gas leak at the front of the carb.
i'm also having problems with fast idle, it likes to kick up and...
i was checking for a fuel leak on the carburetor and was surprised to see a holley 4 barrel carb.
i was expecting a motorcraft carb. did ford ever use holleys as a stock carb?
the previous owner might have done a swap, but i have no way of knowing.
thanks.
the last owner had a new headliner installed. no problem, looks professional.
however, when they recovered the sun visors and re-installed them, they've never been tight.
they won't stay in the up position and there's no tension on them for much adjustment.
i've tightened the 3 screws but it...
just brought home an '86 bronco and am starting to learn the ropes on this little beauty, and i can tell there is going to be a learning curve. @-)
a few things about it: 1986 full size bronco 4x4 with locking hubs, 351 cu in engine, automatic transmission (C6 i think, no overdrive gear)...
i just bought an '86 full size bronco and ran across this website while looking up information about broncos. this place seems to have it all covered.
anyway, i'm glad to be here and plan to learn a lot.
This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
By continuing to use this site, you are consenting to our use of cookies.