Search results

I have a problem that I hope I can get an answer for. I had to replace the passenger side door with a used one , it seemed simple the hook ups look right the mirror and the door glass work but now no power locks, when I started the project both sides worked. 1996 Bronco is what I am working on...

1996 Bronco 5.8 Can the security system that shuts down all the power be disable for good I am having big problems with it when I started back using my keyless remote?

I am in need of a complete ash try unit for my 1996 Bronco. I understand that the trucks of the same few years use the same. I need a dark blue unit or a contact to get one . Thanks

I am going to list this here and if anyone has anything I have not tried that may fix this, am tired of chasing this thing. Codes read as followed First screen,  Fault: 02       Pend:02 Then P0174 , 01/04 and 02/04 Then P0171P,  03/04 and 04/04 This is a simple code reader from Advance auto...

I am having problems with my 96 after I put reman. calipers with steel pistons it pulls to left after it gets hot, do I need to go back to OE calipers with the phinolic pistons, I have replaced the hoses as well.

I have a 1996 Bronco, I have narrowed the problem to two items I hope.  When braking and turning at the same time I experience pedal travel half way down and a pulsating pedal as well. Could this be the ABS control ECU or should I be looking to replace the ABS hydraulics module?  Thanks for the...

I have a 96 Bronco, the rear window defogger will not work. I have power to both sides of the power strip that runs down both sides of the rear window, but nothing in between its hard for me to think that all the lines have a brake in them. What to do next?  Thanks George

Just one question, dose the 96 Bronco have a indicator light some where on the dash that shows when the cruz control is engaged? Thanks

I have a 96 Bronco I have replaced both front hubs, bearings twice on the left side, rotors and seals. it pulls to the left sometimes and sometimes its ok any idea, could it be the ABS system or the proportioning valve. Thanks PS I put new calipers and pads and new brake hoses as well.

I have a 1996 Bronco 5.8 it has been in the shop for two weeks . We are not sure what is wrong at this point , a new fuel pump is going in on Wed.  I have replaced all relays and I should note that the fuel pump is two years old . The computer has been replaced twice now and when you start it ...

I have a 96 Bronco 351, Starting after it has set for 30 min or so, it stumbels like staving for fuel but it smooths out in about 5 to 10 seconds. Feels like a heat soak problem, there are no codes or check eng. light in the winter time when cold no problem. Any ideas Thanks

I have a 96 Bronco and this past weekend I had to have my E4OD trans repaired, anyway the repair guy said that the front hubs are not locking, the light comes on and when you shift to 4wheel low the transfer case is locking down but the axels are not locked. Is there a fix and is it something...

Is ther any fix for rear main seal on my 96 Bronco? I know that you have to pull the trans. to get to it but the 5.8 also has a problem with the crank walking, that would wear out a new seal fast! the fix would be a new short block?? Any help would be great Thanks

I have a 96 Bronco XLT and will need to replace the rearend soon. Is there a 9 inch setup that can be bolted in to the stock Bronco with out major refit? Is this a good idea as with my old 79 Bronco the rearend repair was a lot easier!! Thanks George

I have a question on my 96 Bronco XLT 5.8L, I know that I have a E4OD Trans and I just seviced it at 100,000 miles, it shifts smooth , I also added a 4oz's of Kendal Limited slip additive a tip from a trans rebuilder of 35 years. My concern is that before and after the seviceing, at crusing...

I would like to know what Radiator that I could get to replace my stock unit . I am getting blowout of water on the passengerside of the rad. and when riding at Hyw. speed the temp gauge moves up and down when i stop and look under the hood i have water every were it seems to be coming out of...