is it a good idea to put a shift kit in my e4od? i just wanna get some better shift points and hold the gears longer.
i know different kits do different things, which does what?
also, how hard is one to install? any chance there is a instruction tutorial floating around here somewhere...
all last winter my heat barely blew at all, until i realized there was a giant melted hole in the black plastic that surrounds the heater core and a/c stuff. obviously from the manifolds a long time ago. i just patched it with some duct tape and a towel, but i want to fix it right. i cant seem...
looking to do some upgrades, but first:
does anyone know the stock hp and torque at the rear wheels and motor?
or can anyone tell me estimated what i have with the few mods i have:
5.8, e40d, all emissions removed (except egr for smog legal headers), shorty headers, 2.25 inch straight pipes...
Say my 1990 bronco was a f-250, and i wanted a diesel. what motor would it have been? a 6.9 IDI diesel? or a 7.3? turbo? non-turbo? what were the options you could have had?
basically what motor would (somewhat) easily swap in and go with the truck. ive seen diesel broncos before, but theyre...
so the past three nights, 3 cars have been stolen on my street. one each night. my bronco is too tall to fit in my garage, so it lives outside.
any good security tips you might have?
i pulled it right up to my house, locked the doors, left the porch light on, threw on a set of wheel-lock...
When i go to start it up in the morning, if i give the gas a quick tap, it will come down from the "cold start high idle", idle at about 500 rpm and have a really nice sounding "lope". it will only last about 30 seconds, and go away as soon as i give it any gas. just wondering if anyone knows...
what size speedo gear do i need?
i have 35 inch tires with 4.56 gears
it was originall 31 tires with 3.55
what is the stock speedo gear tooth count?
is it 19?
i really dont want to take it apart and count since i just replaced all those t-case seals. only way im taking it apart is if i find...
i have a quart of duplicolor paint shop black. will that work on the top? or will it all flake off?
its the stock 1990 top. what is it even made out of exactly? it says fiberglass in the owners manual but it sounds like sheet metal.
when i painted my old rims, i shot a little bit of duplicolor...
since ill be changing my gearing, i assume it will be a bit faster. what are some cheap performance engine upgrades i can throw on?
k&n, throttle body spacer?
i cant put a cam bc its a 1990 so there is no mass air and i cant convert to a carb bc the tranny is e40d
every online site that makes them has gone out of business. i found one that still does but they are wayyyyyyy overrpiced.
i included a picture of something along the lines of what i want.
or someone selling one id buy that also
i found a junkyard axle but i dont know what rear gears i have. the rear end is stock. there is no tag on the outside. its gone.
the one at the junkyard is 3.55 gears.
is there any way of knowing the axle code through the vin or door sticker?
my door sticker is
WB TYPE BODY TRANS...
i want to get my a/c to work. the compressor wouldnt come on so i gave it straight 12 volts from the battery and it kicked on.
the thing is, the wires on the drier have been hacked into, and i hacked into the compressor wires to get it to work, so my question is, does anyone know which wires on...
ive never had a rear end go out on me before, but i have a bad feeling about this
first of all,
it has all brand new u-joints
the driveshaft (cv joint) was also rebuilt.
brand new trans mount i just put on 5 minutes ago
no broken motor mounts and rear end is tight on springs.
i took the...
Okay, so i have a number of things that could have lead to this, bc i just installed a bunch of new things so i dont know which it could be.
1. I Put headers on, and a brand new straight pipe custom exhaust (put the headers on in my shop, had a local place make the pipes)
2. when i was putting...
hi, i have a 1990 bronco with a 5.8 FI and the E40D trans.
i am putting a new exhaust on and will be adding long tube headers. i know an intake and carb will fit on it instead of the fuel injection, but i was wondering if it would be a plug-and-play type installation: throw the intake and carb...
I get a clicking/ticking that goes faster as the truck goes faster. I just put my 6 inch RC lift on and have driven about 50 miles on it and its been doing this. it has ALL new u-joints in front and rear.
When i am coasting it does not do it until it comes back down to about 5mph while braking...
I was merging onto the highway and had pretty much full throttle so i could accelerate.
Then smoke started coming through the steering column and before i knew it there was a giant cloud of smoke behind me and i had no oil pressure.
I had to run it for about 10 seconds with no pressure until i...
Last week, i was driving my bronco home on the way home from purchasing it, and the oil pressure dropped to zero, and the CEL light came on.
The previous owner had installed a 2 pod gauge on the floor, one of which was an oil pressure, so the one on the floor was at zero pressure along with the...