While I have the interior out of my 1988 Bronco I am replacing the bench seat with Eddie Bauer bucket seats from a 1989 Bronco. I tried to test fit with the seat tracks and none of the holes in the floor for the bench seat line up with the bucket seat tracks. if anyone has measurements as to where the tracks should bolt up or pictures as to where the seats should be placed I would much appreciate the help. Thanks
Installing bucket seats in my 1988 Bronco
- Thread starter BBSteal
- Start date
Disclaimer: Links on this page pointing to Amazon, eBay and other sites may include affiliate code. If you click them and make a purchase, we may earn a small commission.
yo BB,
Try finding holes with this;
"Seat Mounting Points
The unused bolt holes have rubber plugs, and are not threaded. Threads are cut by the bolts as they are initially installed." by Steve
Try finding holes with this;
"Seat Mounting Points
The unused bolt holes have rubber plugs, and are not threaded. Threads are cut by the bolts as they are initially installed." by Steve
Richard Scarbrough
New member
WOW Thanks for great info, do you have any sources for high back bucket seats for my 95 Bronco?
Thanks Miesk5 for the info and picture, sadly I havent been able to get back out to the garage to work on the Bronco since I posted. Hopefully this weekend Ill be able to spend some time in the garage and try to find the correct holes for mounting.
Yo BBSteal,
Just in case, be prepared to clean up any pan rust.
Just in case, be prepared to clean up any pan rust.
Similar threads
